Asko RFN2274I Instructions For Use Manual - Page 7
Browse online or download pdf Instructions For Use Manual for Refrigerator Asko RFN2274I. Asko RFN2274I 20 pages.
Print Page
INSTALLATION AND CONNECTION
Selecting the location
• Place the appliance in dry and well aired room. The
appliance operates best at temperature ranges
indicated in the chart below. Relevant class of the
appliance is indicated on the rating plate.
Class
SN (subnormal)
N (normal)
ST (subtropical)
T (tropical)
Positioning the appliance
Positioning the appliance requires two persons in order
to avoid injuries or damage to the appliance.
• Place the appliance fl atly and fi rmly on a solid base.
• Avoid exposing the appliance to direct sunlight or
heat sources. If this is not feasible, install insulation
plate between the appliance and adjacent heat
source.
• Be sure to leave enough space for cooling of
condenser (distance from the wall or the opening
2
should be 200 cm
). Distance to the cabinet above the
appliance should be at least 5 cm.
• After the installation, the appliance mains plug should
be accessible!
WARNING!
When installing built-in appliances into a
cupboard or cabinet in a side-by-side layout, the
dew prevention installation kit should also be
purchased and installed. For safety reasons,
dew prevention kit may only be installed by an
authorized service technician!
Order code: 376078 (appliances higher than 1,700 mm)
Connecting to power supply
• Use the power cord to connect the appliance to the
mains power. Wall outlet must be fi tted with ground
terminal (safety socket). Required nominal voltage
and frequency are indicated on the relevant label or
rating plate of the appliance.
• Mains power connection and grounding must be
made in line with standing regulations and local
requirements.
The appliance is able to accommodate minor temporary
voltage tolerances, but they may not exceed -6% to +6%.
Ambient temperature
from +10°C to +32°C
from +16°C to +32°C
from +16°C to +38°C
from +16°C to +43°C
7