ACR Electronics Neo 3 Technisch handboek - Pagina 5

Blader online of download pdf Technisch handboek voor {categorie_naam} ACR Electronics Neo 3. ACR Electronics Neo 3 13 pagina's. Multifuel

Installing the Neo 1W/3W

To install the Neo wall hung version firstly check the suitability of the

wall where the appliance is to be mounted, paying particular attention to

the Neo 1W/3W section on location of unit earlier in this manual.

• Fully unpack the appliance and

remove the top casting plate

• Remove both cotter pins from the

retaining bar

• Remove the retaining bar by sliding it

in any direction and angling the bar

upwards before sliding the bar fully

out of the brackets

N.B. be careful to support the weight

of the mounting bracket when

removing the retaining bar

• Carefully tilt the mounting bracket

away from the appliance at the top

and remove from the bottom

supporting hooks

• Fully remove the mounting bracket

from the appliance the bracket is now

ready to be positioned against the wall

• Position mounting bracket against the

wall, making sure that the bracket is

perfectly level as this will affect the

leveling of the appliance

• The minimum distance above the

finished hearth level is 300mm

• Secure to the wall using a suitable

heavy duty wall fixing which is

applicable to the wall type and is also

heat resistant

• Use a minimum of 6 fixing points to

evenly spread the load

• Once mounting bracket is securely

fixed to wall position the bottom of the

appliance on to the hooks at the

bottom of the mounting bracket

• Tilt the appliance into the vertical

position and replace the retaining bar

and cotter pins as per previous

instruction