Ambroise UTX-STABIL Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} Ambroise UTX-STABIL. Ambroise UTX-STABIL 18 pagina's. Orthosis

Ambroise UTX-STABIL Handmatig
can open up far enough

DONNING AND DOFFING THE UTX

The UTX-SWING orthosis is put on while sitting. To achieve this, the orthosis must first be
unlocked by hand. Straighten the knee hinge of the orthosis, make a dorsal flexion at the ankle
hinge (bring the foot up) and bend the orthosis.
The orthosis is put on the leg while it's in a 90 degree angle. In some cases, the foot is first
placed on the foot support, so the foot and foot support can be inserted together in the
shoe. In other cases, the foot support is first placed in the shoe. The strap below the knee is
fastened first. The order to fasten the remaining three straps is up to your liking.
The UTX-ESF / STABIL orthosis is also put on while seated. To do so, the orthosis must first
be unlocked by hand. Straighten the knee hinge of the orthosis, push the button at the top of
the orthosis and bend the orthosis.
On our YouTube channel you can find a tutorial how the UTX can be donned and doffed.
www.youtbube.com/AmbroiseHolland
It will require practice to become skillful in donning and doffing the orthosis. See the following
instructional photo series:

CLOSING THE CLIPS

- when brace is on the leg.
1. Hold the clip between thumb and index finger and bring it
towards the connector. Beware of any skin entrapment.
3. Close the clip with your thumb. Beware of skin entrapment.
UTX.2018.01
User information | +31 (0)53 4302 836 | [email protected] | www.ambroise.nl
Figure 2: Photo measurement, casting the leg
2. Connect the clip with the connector with a twisting motion.
Make sure the clip is well connected.
4. When you hear the 'click' it means the clip is closed correctly.
is no longer needed.
4