Aero BLACK Series Installatie-instructies - Pagina 2
Blader online of download pdf Installatie-instructies voor {categorie_naam} Aero BLACK Series. Aero BLACK Series 12 pagina's.
Pagina afdrukken
Follow this step by step guide to complete the installation of your system.
SYSTEM SET-UP
Place your pots in the desired location taking care to place them
evenly and on a level surface. There is enough pipe included in the
kit for the 15L pots to be 50-60cm plant centres and 30L pots at
60-75cm centres.
Examples:
15L 16 pot system – 2 x 2m (50cm centres) or max 2.4 x 2.4m (60cm centres).
30L 16 pot system – 2.4 x 2.4m (60cm centres) or max 3 x 3m (75cm centres).
Pipe lengths between pots:
15L - 50cm plant centres = 45cm
15L - 60cm plant centres = 55cm
Lay the pots down on their side. Fit the 32mm threaded fittings into
1
the holes at the bottom of the pots. The rubber washer must be on
to
the outside. Secure the nut on the inside with the spanner provided.
4
Tees are used on all pots except for the end of line where elbows
are used.
Measure the distance between the barbed fittings. Taking note of
5
the maximum pipe lengths, cut and fit the 32mm green pipe.
6
Place a pair of stands under each pot.
7
Fit a tee to the header pot. Refer to the bird's eye images for 2, 3
8
and 4 row systems. The 48 pot system is a 6 row system. Connect
to
the header to the pots using 32mm tees & elbows.
11
Place a drain cover in the bottom of each pot.
12
Push-fit the pot clips into the slots on the side of the pots.
13
14
Push-fit two grommets into each lid and place a lid on every pot.
14a
14b
If you have a 2 row system (4, 6, 8 or 10 pots), the valves with green
15
taps are screwed directly to the header pot.
For 3, 4 and 6 row systems, screw the valves on to the threaded
16
tees and elbows as shown. 9, 12, 15, 16 & 18 pot systems use 19mm
threaded tees & elbows, 21 pot systems upwards use 25mm.
2
30L - 60cm plant centres = 55cm
30L - 75cm plant centres = 70cm