AMC XCDie-vt Handleiding voor installatie en gebruik - Pagina 9
Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} AMC XCDie-vt. AMC XCDie-vt 20 pagina's. 24bit / 192khz sampling advanced segment dac, with amc proprietary designed switching mode power supply to cover 100 ~ 240vac
6. PROGRAM
The XCDi can be programmed to play up
to 20 tracks in any desired order.
Press the PROGRAM button you can
start to program playback. The "P-01"
indicator will be turned on and ready for
programming.
a) Use TRACK or TITLE Up/ Down
buttons (10) to go to the TRACK
you will like to put into the
PROGRAM.
b) Press "PROGRAM" button to put
the TRACK # into the PROGRAM.
c) The number (:##) after "P-"
indicates number of PROGRAM
you are putting in. So, once you
press "PROGRAM" button the
number will increase 1.
d) Repeat above step "a)" and "b)"
until all TRACKS you like to put
into PROGRAM are entered.
e) Press PLAY/PAUSE button to start
t h e p l a y b a c k f o l l o w i n g t h e
sequence you entered into the
PROGRAM.
f) To clear the PROGRAM memory,
press STOP button.
7. REPEAT / enter
This REPEAT button will allow three
different types of endless play modes.
Press REPEAT button once, the word "1"
will appear on the display and the
selected track will be repeated endlessly
until the STOP button is pressed.
Press REPEAT button a second time, the
word "A" will appear and all tracks will be
repeated endlessly until the STOP button
is pressed.
Press REPEAT button a 3rd time to
cancel REPEAT mode. The display and
operation will return to normal.
8. TRACK / TITLE
This is button to select TRACK or TITLE
of MP3 disc or USB or SD Card. For CD
disc, this button has no function.
The default is TRACK mode. The display
inside window will only show the TRACK
number (###). Under TRACK mode, you
can change TRACK # Up or Down by
pressing the TRACK/TITLE Up (>) or
Down (<) button.
When you press the button once, it will
switch from TRACK mode to TITLE mode
and the staying 5 sec. for TITLE select,
You can change TITLE # Up or Down by
pressing the TRACK/ TITLE Up (>) or
Down (<) button. The English title name
will show in display.
Press the button again to confirm your
selection.
9.
SEARCH
Press and hold SEARCH (<< or >>) to
find a desired starting point or a certain
part of a track.
10.
TRACK / TITLE
Press TRACK / TITLE ( < or > ) to find a
desired TRACK or TITLE corresponding
to what the mode TRACK/ TITLE button
selected.
11. DISPLAY
When loading a disc and using the
OPEN/CLOSE button to close the disc
drawer, the TOC (Table of Contents) of
the disc will be read and display will show
the number of tracks and total playing
time of all the tracks on the disc. For
those discs without TOC or data of time of
each track, the display of total time on the
disc will be "00:00" (For discs you
generated yourself from your computer
will be the case.)
7