ACR Heat Products HERITAGE Installatie- en bedieningshandleiding - Pagina 9
Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} ACR Heat Products HERITAGE. ACR Heat Products HERITAGE 9 pagina's.
Pagina afdrukken
sediments in your chimney and has a higher efficiency rate than a
conventional stove.
Wood is environmentally friendly as it consumes more Carbon Dioxide
whilst growing than it emits during the burning of it. It is one of the very
few fuels renewable within our lifetime. In fact, wood is the only fuel that
the Carbon Trust recognise as being "zero rated" in it's kg's of CO2
emitted each week into the atmosphere.
produced through burning is cancelled out by the fact that it consumes
more than this during it's growing.
TROUBLESHOOTING
PROBLEM
SMOKE ENTERING
ROOM FROM
APPLIANCE
TAR FORMATION
GLASS SOOTING UP
CAUSE OF PROBLEM
Make sure that the wood being burned is well
seasoned with a moisture content of no more
than 20%. Trying to burn "green" wood is like
trying to burn water.
Ensure you are not closing down the airslides
before the fire is established.
Ensure you have allowed the chimney to become
warm / hot during the initial lighting period.
Check for a flue blockage – consult a chimney
sweep if necessary.
If the problem persists, consult your stockist on
the suitability of your chimney.
Use of unseasoned wood
Poor chimney draught
Operating
the
temperatures
Use of unseasoned wood
Check the secondary airslide is open
9
In other words, the CO2
appliance
at
very
low