Amcor PLMB12KE-410 Engelse gebruiksaanwijzing - Pagina 7
Blader online of download pdf Engelse gebruiksaanwijzing voor {categorie_naam} Amcor PLMB12KE-410. Amcor PLMB12KE-410 13 pagina's. Plmb mono blocs
Ook voor Amcor PLMB12KE-410: Gebruiksaanwijzing (13 pagina's)
Pagina afdrukken
Programming the timer for OFF - when the unit is RUNNING.
• Perform the standard steps as described above.
The circular time scale will be on between the present time to the OFF programmed time.
The flashing bar on the time scale indicates the real time and moves a segment ahead every
30 minutes until it reaches the OFF timer time, then the black segments in the circular time
scale will disappear.
Repeat OFF and ON
Programming the timer for repeat OFF and ON - when the unit is RUNNING.
• Perform the standard steps as described above.
• Repeat the above procedure while the digits are still flashing for setting the ON.
The circular time scale will be ON between 00:00 to the time set with the timer to OFF and
from that time until 24:00. The flashing bar on the time scale indicates the real time and
moves a segment ahead every 30 minutes. The unit will operate daily according to the timer
setting.
Repeat ON and OFF
Programming the timer for repeat ON and OFF - when the unit is NOT RUNNING.
• Perform the standard steps as described above.
• Repeat the above procedure while the digits are still flashing for setting the OFF.
The circular time scale will be OFF between 00:00 to the time set with the timer to ON and
from that time until 24:00. The flashing bar on the time scale indicates the real time and
moves a segment ahead every 30 minutes. The unit will operate daily according to the timer
setting.
After a power failure, or after the unit has been unplugged, you will have to program the
timer settings again.
Cancelling the timer function
In order to cancel the timer programming press the
return to the time display. The daily mode will be cancelled as well. The black segments in
the circular time scale will disappear.
Air flow
On the moment the air conditioner is connected to the mains, the louvres
open and close and stay closed.
• When the ON-button is pressed, the louvres open to maximum and
return to an angle of 75° above the upper plane of the louvres housing.
• Press the
-button, the louvres will swing continuously up and down
between 30° and 80° above the upper plane of the louvres housing.
• By pressing the
remain in that position. The direction of the air flow is then constant.
• When the OFF-button is pressed, the louvres close.
This way of directing the air flow is particularly convenient when using
the remote control: a user friendly approach to your comfort.
In order to direct the air flow to a lower angle, raise the louvres housing
by pulling it up only by the centre of its back rim.
-button again the movement will stop and the louvres
button momentarily, then it will
Air outlet down,
louvres closed
Raising the
louvres housing.
Air outlet up,
louvres opened
7