Flodin Works Flodin Modelwork Saab 29 Tunnan Handmatig - Pagina 3

Blader online of download pdf Handmatig voor {categorie_naam} Flodin Works Flodin Modelwork Saab 29 Tunnan. Flodin Works Flodin Modelwork Saab 29 Tunnan 11 pagina's.

Pagina afdrukken

ABOUT THE MODEL

Wingspan

Take off weight

Motor

Battery

Wing loading

This model is designed for printing with LW-PLA from Colorfabb. The

parts is made with spiral printing in mind as far as possible. There is a

few parts that is made with a single wall and infill instead.

I've tried to keep it as scale as possible to make a good looking and

convincing model. And if you like to sand and paint, this model will be a

good canvas to make a stunning looking model.

CENTER OF GRAVITY

The CG is pretty much in the middle of the wing cord at the root. Se

image above.

MY PAINTING PROCESS

I find it more easy to paint and detail everything bebore i assemble the

whole plane. So I glue the wings and paint them. And the fuselage as

one part and so on. After all is painted I glue them all together.

First off is sanding the surface with a quite coarse paper (about 260

grit). This will take away most of the layer lines. Then I spray it with the

spray putty. Now take a 600 grit wet paper and wet sand it until almost

all the putty is gone. You will now have a very smooth surface.

Spray it once again with spray putty and wet sand it with a 1200 grit

paper. Sand it until there is almost no putty left. Now the layer lines is

gone and the surface is super smooth.

Now it's time to paint the base coat of aluminium. The AK true metal

is a wax paint that is smeared out with the finger. You don't need much.

After it's dry you can buff it up with your finger or with a cloth. It will

become very shiny and metal looking. After this you need to seal it. I

used a satin clear cote in a spray bottle.

Decal time... and of you want, wheathering. I made the decals with a

incjet water sliding decal sheet. The only problem is that it's on a clear

base, so the background color will show through. So I touched up the

markings with yellow and blue acrylic color.

For wheathering and panel lines I used oil colors for plastic models.

One more cote of satin clear cote so seal it all and you are ready to

glue the pieces together.

Spray putty. Effective to get rid of those layer

lines. It will give you a bit of extra weight but

you'll sand away almost all of it.

J2 9 TUNNAN - MANUAL

800mm

≈800g

FMS 50mm EDF 4s

4s 1500mAh

=75g/dm

I've been looking a long time to get a natural

aluminium finish. Spay paints just don't look

like real metal. This wax-paint from AK is

actually very good.

FL O DI N M ODEL W O RKS

The nose part after painting with AK True

metal.