Floe VSD 10000 Montagehandleiding - Pagina 13

Blader online of download pdf Montagehandleiding voor {categorie_naam} Floe VSD 10000. Floe VSD 10000 16 pagina's. Full length pontoon & tri-toon bunks large lifts
Ook voor Floe VSD 10000: Montagehandleiding (8 pagina's)

Pagina afdrukken
Floe VSD 10000 Montagehandleiding
ADJUST HEIGHT AND HAND TIGHTEN ONLY (FIGURE 1.6). ATTACH CLAMP WELDMENTS TO CRADLE
BEAM USING (2) 3/8" X 4" BOLTS AND (2) 3/8" NUTS. DO NOT TORQUE (FIGURE 1.7).
FIGURE 1.6
2X
BUNK/CRADLE PAD DISCLAIMER
DUE TO THE LARGE VARIETY OF BOAT HULL DESIGNS, WE STRONGLY RECOMMEND
THAT YOU CONSULT WITH YOUR BOAT'S MANUFACTURER TO INSURE THAT YOUR ARE
SUPPORTING YOUR BOAT PROPERLY TO AVOID ANY POTENTIAL DAMAGE.
NOTE: SEE FIGURE 2.4 FOR GENERAL GUIDELINES ON SETUP
2X
FIGURE 1.7
SHEET 13 OF 16