Flomec G Series Handleiding voor producteigenaren - Pagina 16
Blader online of download pdf Handleiding voor producteigenaren voor {categorie_naam} Flomec G Series. Flomec G Series 20 pagina's. Industrial and chemical models
Ook voor Flomec G Series: Gebruikershandleiding (16 pagina's), Handleiding voor producteigenaren (20 pagina's)
Pagina afdrukken
Accuracy *
Linearity *
Repeatability *
Response Time:
1 in., 1-1/2 in. & 2 in
Frequency Output:
1 in, 1-1/2 in. & 2 in.
Voltage Output:
1 in., 1-1/2 in., & 2 in
Maximum Overage
Operating Temperature
Housing
Rotor
Shaft
Rotor Supports
Sleeve/Thrust Bearing
Retaining Rings
* Data based on water calibration @ 77°F (25°C).
SPECIFICATIONS
±0.5% of the true flow at any point within the
linear range of the turbine flowmeter.
±0.5% of the mean K- factor throughout the
linear range.
±0.1% of the indicated flow throughout the
linear range.
2-5 milliseconds for step change in flowrate.
100 - 1000 Hz (Over the linear range)
Approx. 100 mV @ 100 Hz to
1.0 Volt (r.m.s.) @ 1000 Hz
Up to 125% of maximum flowrate for
intermittent periods.
-100° F to +225° F
(-70° C to +107° C)
Standard Materials of Construction
316 Stainless Steel
Nickel Plated CD4MCu Stainless Steel
316 Stainless Steel
316 Stainless Steel
PEEK
300 Series Stainless Steel
Figure 9
Materials of Construction
16