cnsat Smart Antenna Selector Gebruiksaanwijzing - Pagina 11

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} cnsat Smart Antenna Selector. cnsat Smart Antenna Selector 15 pagina's.
Ook voor cnsat Smart Antenna Selector: Gebruiksaanwijzing (14 pagina's)

Pagina afdrukken

Smart mode

This mode is useful to have the best signal when you are using only one satellite

distribution, for example Sky UK. In this mode the automation processor read datas

from both antennas, check the signal level and the relative azimuth and select the

one which is not covered from the mast and/or with the best signal level. In this case

you have to select the same satellites on both antennas (Astra 28E in case of Sky

UK).

The system can select the best antenna signal automatically or you can force it

manually on one antenna.

Remember that if you select different satellites on antenna control units the system

automatically react and goes on DIRECT mode (the balancing between two different

satellites is not useful).

To have the system working properly both antennas control units have to be ON and

of course the selector has to be on. If one or both antennas control units are off the

system cannot read informations about signal/position and cannot work.