Floodstop FSATFS10 Instructies en bedieningshandleiding - Pagina 4

Blader online of download pdf Instructies en bedieningshandleiding voor {categorie_naam} Floodstop FSATFS10. Floodstop FSATFS10 8 pagina's. Tethered float switch

Pagina afdrukken
1.
Wrap the hose clamp around the discharge pipe. Use a
screwdriver to tighten and secure the hose clamp.
2.
Feed the tether cord through the cord bracket. Determine the
appropriate tether length. The tether length may vary depending
on the product or application specifications.
3.
Using a screwdriver, tighten the cord bracket with the screw
located on the top of the bracket. Do not overtighten.
4.
Connect the Tether Float Switch power cord to a 120VAC outlet.
Then, connect the pump power cord into the Tether Float Switch
piggyback receptacle.
5.
Test the pump for proper operation by lifting the Tether Float
Switch bulb past a 45 degree angle. Release the bulb to its
resting position after 3 seconds of proper operation.

INSTALLATION

- 3 -