Co2meter RAD-0102-6 Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Co2meter RAD-0102-6. Co2meter RAD-0102-6 12 pagina's. Remote storage safety 3 alarm
Ook voor Co2meter RAD-0102-6: Installatiehandleiding (8 pagina's)

Pagina afdrukken

1. Installation Instructions

9. Advanced Management Settings

9.1) Latch function: On/Off. Default is On.

Fault light will keep flashing if AL3 is activated, indicating unit went into alarm status.

1. Press Up & Enter button for 10 seconds

2. Change to Advance Mode by pressing Mode, and choose Lat Mode

3. Press Up/Down to set Latch Mode On or Off.

4. Press Enter to Save

9.2) Alarm Level Lock: Lock/Unlock.

User cannot adjust the alarm levels when Locked. Default is Lock.

1. Press Up & Enter button for 10 seconds

2. Change to Advance Mode by press Mode, and choose Alm Mode

3. Press Up/Down to set Alm level Lock or Unlk.

4. Press Enter to Save.

9.3) Barometric compensation: On/Off. Default is On.

Unit automatically compensates for barometric pressure / altitude.

1. Press Up & Enter button for 10 seconds

2 Change to Advance Mode by press Mode, and choose Baro Mode

3. Press Up/Down to set Baro Mode On or Off.

4. Press Enter to Save.