Co2meter RAD-0102-6 Installatiehandleiding - Pagina 5

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Co2meter RAD-0102-6. Co2meter RAD-0102-6 8 pagina's. Remote storage safety 3 alarm
Ook voor Co2meter RAD-0102-6: Gebruiksaanwijzing (12 pagina's)

Pagina afdrukken

• Power + 24 VDC MAX– The RAD-0102-6 is powered from 12 to 24 Volts

DC. You may use the supplied 12 Volt DC Power Adapter or other 12 to 24

Volt DC Power Source.

• Power -

• Battery +

• Battery -

• CL01:4-20mA 4-20 mA for CO2: 0 to 50,000ppm

• GND

• CL02:4-20mA 4-20 mA for Temp: 32 to 122° F (0-50°C)

• Alarm 1 – is fixed. It cannot be configured. It is set to activate if the

average CO2 Concentration is above 0.5% (5000 ppm) for 8 hours.

• Relay 2 – is activated by Alarm 2.

• Alarm 2 can be configured to alarm when CO2 Concentration reaches

Alarm 2 Set Point.

• Alarm 2 Set Point can be configured for 0.5% (5000 ppm)

1.0%,1.5%,2.0%,2.5%,3.0%.

• Relay 3 – is activated by Alarm 3.

• Alarm 3 can be configured to alarm when CO2 Concentration reaches

Alarm 3 Set Point.

• Alarm 3 Set Point can be configured for 2.0%,2.5%,3.0%,3.5%,4.0%.

• The Peak current for all relays is 2A@30 VDC or 250 VAC.

• All relays are Single Pole Double Throw with a Common (COM), Normally

Open (NO) and Normally Closed (NC) contacts.

• All relays are Single Pole Double Throw.

• Relays are rated, 2A @ 30 VDC or 250 VAC.

Ground

Back-up battery

Back-up battery Ground

4-20mA GND