Coaire CNCM10 Installatie- en bedieningshandleiding - Pagina 5
Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} Coaire CNCM10. Coaire CNCM10 18 pagina's. Non-cycling refrigerate air dryers
Pagina afdrukkenCompressed air is a highly hazardous energy source.
Never work on the dryer with pressure in the system.
Never point the compressed air or the condensate drain outlet hoses towards anybody.
The user is responsible for the proper installation of the dryer. Failure to follow instructions given in the "Installation" chapter will void
the warranty. Improper installation can create dangerous situations for personnel and/or damages to the machine could occur.
Only qualified personnel are authorized to service electrically powered devices. Before attempting maintenance, the
following conditions must be satisfied :
Ensure that main power is off, machine is locked out, tagged for service and power cannot be restored during service
operations.
Ensure that valves are shut and the air circuit is at atmospheric pressure. De-pressurize the dryer.
Warranty does not apply to any unit damaged by accident, modification, misuse, negligence or misapplication.
Unauthorized alterations will immediately void the warranty.
In case of fire, use an approved fire extinguisher, Water is not an acceptable means in cases of electrical fire.
This dryer has been designed, manufactured and tested for the purpose of separating the humidity normally contained in
compressed air. Any other use has to be considered improper.
The Manufacturer will not be responsible for any problem arising from improper use; the user will responsible for any
resulting damage.
Moreover, the correct use requires the adherence to the installation instructions, specifically:
• Voltage and frequency of the main power.
• Pressure, temperature and flow-rate of the inlet air.
• Ambient temperature.
This dryer is supplied tested and fully assembled. The only operation left to the user is the piping connections to the
compressed air system in compliance with the instructions given in the following chapters.
The purpose of the machine is the removal of water and residual oil vapor present in compressed air. The dried air
cannot be used for respiration purposes or for operations leading to direct contact with food products.
This dryer is nor suitable for the treatment of dirty air or of air containing solid particles.
Check for visible loss or damage, if no visible damage is found place the unit near to the installation point and unpack the
contents.
• Always keep the dryer in the upright vertical position. Damage to components could result if unit is laid on it's side or if
placed upside down.
• Store machine in a clean, dry environment, do not expose to severe weather environments.
The packaging materials are recyclable. Dispose of material in compliance with the rules and regulations in force in the
destination country.
1.2 WARNINGS
1.3 PROPER USE OF THE DRYER
2.1 TRANSPORTING THE UNIT
4