Coast-Air CEW061BS Installatie- en bedieningshandleiding - Pagina 8

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} Coast-Air CEW061BS. Coast-Air CEW061BS 16 pagina's.

Installation and Operation Instruction Manual

INSTALLATION INSTRUCTIONS

B.Drive

3/4" (19mm) or

screws through frame holes into window sash (Fig.8).

Fig.8

C.To secure lower sash in place, attach right angle

sash lock with 3/4" (19mm) or 1

shown(Fig.9).

D.Cut

Window sash seal foam

space between the upper and lower sashes (Fig.10).

INSTALL R1 HARDWARE (only be

applicable to Energy star models )

In order to minimize air leaks and ensure optimal

insulation, it is necessary to install the included R1

hardware to the side curtain. Follow the instructions

below.

Step 1. After the unit is installed to the window,

measure the inner width of the side curtain as shown

(Fig.11).

Step 2. Remark a line on the provided R1 insulation

panel according to a length 1/8 (3mm) less than the

measured width in step 1, then cut the R1 insulation

panel along the line (Fig.12).

www.coastair-ac.com

1/2" (12.7mm) locking

/2" (12.7mm)

screw as

Fig.9

and insert it in the

FOAM SEAL

Fig.10

Fig.11

Fig.12

Step 3. Slide the R1 insulation panel into the side

curtain, the side with pattern should face the indoor

side.(Fig.13).

Fig.13

Step 4. Repeat on the other side.

6,000 - 12,000

Measure the inner width

of the side curtain