Coastal Amusements BLACK TIE Gebruikershandleiding - Pagina 12

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Coastal Amusements BLACK TIE. Coastal Amusements BLACK TIE 17 pagina's.

Pagina afdrukken

Does not move to left

and/or right by

joystick operation

Items

Description

Don't lower down by

Claw

【Descend】button

Descen

ding

operation, but only

until time's up

Don't lower down, but

the 【 Descend】 button is

in normal condition

Don't lower down or

only down a bit and

close up in the air then

it returns to its home

position.

Don't fully lower

down

Don't open when

Claw

Grabbi

reached to exit door

after seizing

Don't rise up after

seizing and is returned

back to its home

position.

Don't close up and not

be returned to its

home position, either.

1. Check if the left/right motor fuse (LR) at the fuse board is

burned?

2. Check if left and/or right SW is out of function or if their

wires are properly connected.

3. Check if J5 connecting pin of P.C.B. is properly connected.

4. Check if stop-left SW (Gantry & Assembly I No. 21) is in

proper position.

5. Check if Left/Right motor is out of function or if its wires are

properly connected. Also check if its shaft pinion is properly

positioned.

6. Check if J9 connecting pin of P.C.B. is properly connected.

7. Check if all connecting pins of gantry are properly

connected to the machine

Check and Maintenance

1. Check if 【Descend】button is functioning properly.

2. Check if connecting wires of【Descend】button are properly

connected.

3. Check if J5 connecting pin of P.C.B. is properly connected.

1. Check if Up/Down motor wires are properly connected.

2. Check if Up/Down motor is out of function. Also check if its

shaft pinion is in proper position.

3. Check if J9 connecting pin of P.C.B. is properly connected.

4. Main board break down

1. Check if winding cord is stuck.

2. Check if stop-down SW is functioning properly

1. Check if winding cord is of proper length?

2. Check if winding cord is stuck.

3. Check if stop-down SW is functioning properly

1. Check if stop-back or stop-left SW is out of function or if

their wires are properly connected.

2. Check if the gantry wire connecting to J9 connecting pin of

P.C.B. is properly connected.

1. Check if stop-up SW is hit by something.

2. Check if stop-up SW is in proper position and in normal

function.

3. Main board breaks down.

1. Check if the up/down motor are out of function or if their

wires are properly connected.

2. Check if stop-up SW is functioning properly.

3. Main board break down.