Canon BJ F210 Vereenvoudigde handleiding - Pagina 5

Blader online of download pdf Vereenvoudigde handleiding voor {categorie_naam} Canon BJ F210. Canon BJ F210 10 pagina's.

Pagina afdrukken

4. Service Mode

Function
Cleaninng the BJ cartridge
Test print
1)
Nozzle pattern
2)
Service test print
Control ROM Version
Pages of each Cartridge
Waste ink Amount
Destination setting
EEPROM Reset
(Reset waste ink amount)
Destination setting
(Japan/SP/Others)
*1
Service test print
-1 Without the cartridge installed, connect the plug of the AC adapter to the AC outlet
while holding down the RESET button.
-2 Release the RESET button, press it down again within 5 seconds and release it.
-3 Open the front cover and install the BC-20 (black BJ cartridge)
-4
Hold down the RESET button for 2 seconds or more and release it.
-5 Close the front cover.
-6 The printer starts service test printing.
*2
EEPROM reset / Destination setting
-1 Without the cartridge installed, connect the plug of the AC adapter to the AC outlet
while holding down the RESET button.
-2 Release the RESET button, press it down again within 5 seconds and release it.
-3 Hold down the RESET button for 2 seconds or more and release it.
-4 < EEPROM Reset >
Hold down the RESET button for 2 secs or more.
*3
Print sample of 'Service test print'
You can check the EEPROM setting by 'Service test print'.
Control ROM Version
ROM Ver X.XX BC-20 Lost Ink XX.X% Page count-->BK XXXX PB XXXX CL XXXX VC XXXX LD XXXX VL XXXX SC
XXXX
CG ROM Ver X.XX BJYYYYY
close
Destination setting
Japan
SP
Others
Procedure
Press and hold the RESET botton for 2 seconds or more
( while the AC plug is plugged in)
Double click the RESET button.
( while the AC plug is plugged in)
See *1 service test print'
See *2 EEPROM reset / Destination setting
See *2 EEPROM reset / Destination setting
Amount of waste ink
Wiping yyyy Manual purge yyyy Dry time : OFF Purge Flag : yyy Door :
BJ F210
BJC-2100SP
BJC-2100
< Destination setting >
-Japan
Press the RESET button once.
-Others
Press the RESET button twice
-SP
Press the RESET button 3 times
After the button is pressed, the carriage will move same time
as the number of times the RESET button is pressed.
Remarks
Cleaning time
:Approx.20seconds.)
Print nozzle check pattern
BC-20/21e/22e/29F
Needs BC-20
Print sample : See *3
Page counts of
SC
IS-22(Scanner)
VL
BC-22e
VC
BC-21e
BK
BC-20