Acer AL1917W C Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Acer AL1917W C. Acer AL1917W C 11 pagina's. 19-inch flat panel active-matrix tft lcd
Ook voor Acer AL1917W C: Gebruikershandleiding (10 pagina's), Gebruikershandleiding (16 pagina's), Handmatig (12 pagina's), Servicehandleiding (44 pagina's), Handmatig (12 pagina's)

Pagina afdrukken
Acer AL1917W C Gebruikershandleiding
(1)
Power Cord
Audio cable
(2)
VGA Cable
(3)
WARNING:
The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make sure the shape of the plug matches
the shape of the socket it is inserted into, and tha t non e of the pins are bent or otherwise damaged.
Operating Your Monitor
First, switch th e power on to the monitor, then switch the power on to the computer. When you see the LED on
the power button go green, this indicates the computer is ready for use. Allow abo ut 10 seconds for the video
signal to appear. If you do not see the green light on the power button or a video signal, check the connections .
1
2
4

OSD Options

Please refer to "External Controls " on Page 5. To adjust the OSD settings :
1. Press the MENU bu tton to open the OSD menu .
2. Use th e buttons marked < or >, to highlight a control, then press the MENU bu tton to en ter
3. Use th e buttons marked < or >, to adjust the control to the desired level.
4. When you have finished making all selections, press the MENU button to exit the O S D. (Or the adjustment
will auto-save a fter 45 seconds.)
Attach the monitor to the power cord which should then be
inserted into a properly grounded electric socket.
Connect the signal cable to the VGA output socket of the graphics card
on the computer. Then tighten the thumbscrews on the connector
If OSD is active, press to exit. If OSD is inactive, press and the
monitor will automatically optimize the display position, clock and
phase of your display.
If OSD is active, press to select or adjust OSD options.
If OSD is active, press to select or adjust OSD options.
Press to view OSD. Press again to exit.
Power on/off
Green: power on
Power
Orange: in sleep mode