Aktakom ATH-3231 Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Aktakom ATH-3231. Aktakom ATH-3231 8 pagina's. Dc power supplies

SAFETY PRECAUTIONS

These instruments fulfill the regulations of CE-LVD (EN-61010:2001)

and CE-EMC (EN-55022:1998/+A1:2000; EN 55024:1998; EN61000-3-

2:2000; EN61000-3-3:1995)

To ensure safe operation of the equipment and eliminate the danger

of serious injury due to short-circuit (arcing), the following safety

precautions must be observed.

Damages resulting from failure to observe these safety precautions are

exempt from any legal claims whatever.

• Prior to connection of the equipment to the mains outlet, check

that the available mains voltage corresponds to the voltage setting

of the equipment.

• Connect the mains plug of the equipment only to a mains outlet

with earth connection.

• Do not place the equipment on damp or wet surfaces.

• Do not subject the equipment to direct sunlight or extreme

temperatures.

• Do not subject the equipment to extreme humidity or dampness

• Replace a defective fuse only with a fuse of the original rating.

Never short circuit fuse or fuse housing

• Do not exceed the maximum permissible input rating.

• Conduct measuring works only in dry clothing and in rubber shoes,

i.e. on isolating mats.

• Comply with the warning labels and other info on the equipment.

• Do not insert metal objects into the equipment by way of the

ventilation slots

• Do not place water-filled containers on the equipment (danger of

short-circuit in case of knock over of the container)

• Do not operate the equipment near strong magnetic fields (motors,

transformer etc.)

• Do not subject the equipment to shocks or strong vibrations

• Keep hot soldering iron or guns away from the equipment

• Allow the equipment to stabilize at room temperature before

taking up measurement (important for exact measurement)

• Do not modify the equipment in any way