aero-naut Princess Gebruiksaanwijzing - Pagina 10
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} aero-naut Princess. aero-naut Princess 17 pagina's. 3081/00
Pagina afdrukken
38
32
37
38
39
37
4
5
6
40
39
41
40
38
37
38
2
3
32
38
37
29
Glue the supports 38 to the cockpit side
panels 37. Place both side panels in the
hull, with the supports 38 on the inside. The
side panels 37 must butt up against the
edge of the deck 32; you may need to sand
38
back the deck support rails 22 slightly to
achieve this.
30
The side panels 37 must fit between the
deck 32 and frames 2 - 7. Use the cockpit
floor 39 to press the side panels 37 against
the frames; at the same time the floor
panel 39 must rest on the supports 38.
Glue the cockpit floor 39 to the side panels
37, but do not glue the front 70 mm.
31
Check that the cockpit back panel 40 fits
vertically before gluing it to the cockpit
cradle.
32
Insert the couch floor 41 in the slot in the
cockpit back panel 40 and press it down
onto the supports 38 between the side
panels 37.
Glue the corner / edge joints of parts 37 -
41.