AktiMate Mini Installatie-instructies
Blader online of download pdf Installatie-instructies voor {categorie_naam} AktiMate Mini. AktiMate Mini 4 pagina's.
Pagina afdrukken
Setup Instructions
Congratulations on your purchase of the AktiMate
Using speaker technology licensed from Epos Limited in the U.K., these speakers have been
developed and built to exacting standards.
With a 3-year parts and labour warranty, your AktiMate
enjoyment. Choose your source - whether it be an iPod, MP3 player, CD player, tuner, TV or any
other hi-fi product, plug it in, turn-up the volume and have some fun!
The AktiMate
speaker system has a built-in 40-Watt per channel amplifier making this a very
Mini
flexible and portable hi-fi system, allowing you to listen to your music whenever you like - wherever
you like.
FEATURES
(See rear page for full specification)
Two way fully shielded active (master) and passive (slave)
Built-in iPod docking station complete with full-set of adaptors for all sizes
Auxiliary connection for any type of audio source including CD, Tuner, etc.
Local volume control on front of active speaker with push button standby feature
IR remote control
Switchable mains voltage
Available in high gloss white, black and red finish
CONNECTION
Speaker Cable
The 3-metre speaker cable is to connect the passive (slave) speaker. You have the choice of fitting
the screw-on banana plugs supplied with the speakers, or simply using bare wires. We recommend
using 4mm plugs. If you want to extend the cable, please do so in one length, not by adding to the
existing cable. Shorting the speaker cable can cause damage to the built-in amplifier.
Be sure to connect the speakers in phase. Maintain the same polarity by connecting the red and
black terminals on one speaker to the red and black terminals on the second speaker. Be sure to
match the gold-coloured side of the speaker wire to the red terminals on both speakers.
Power Cord
Verify that the power switch on the rear of the active speaker is in the off (0) position. Check that the
voltage switch is set to the right voltage for your country. Check with your dealer if you are unsure.
Connect the power cord into the speaker and the other end into the wall outlet. Switch the system on
(1) with the power switch on the rear panel.
POSITIONING
It is always worth remembering when positioning hi-fi speakers, that your room acoustics have a
huge impact on the overall sound quality. As a consequence, there are no hard and fast rules when
specifying placement, so we would always recommend that you try a few different locations to see
what works best for your particular taste.
As a rule, your speakers should be equidistant from side walls and at least 15-30 cm (6-12 ins) from
a rear wall. The ideal height would be when tweeters are at eye or ear level when listening.
AktiMate
active speaker system.
Mini
system will provide you with years of
Mini
Mini