Aktobis WDH-616b Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Aktobis WDH-616b. Aktobis WDH-616b 7 pagina's.

Pagina afdrukken

MAINTENANCE AND CLEANING INSTRUCTION

Maintenance and cleaning instruction

Please remove the plug from the socket

before cleaning and maintenance.

·Do not clean the unit with water.

·If you are cleaning with scour, please dilute the

scour before use.

·Do not clean the unit with the solvent listed on the right which may cause distortion

or depigmentation.

·if clean with chemical solvent,please read its cautions carefully before use.

Cautions for the replacement of the UV lamp

Warning

(1) Please turn off power before replacement of filters and UV lamp, otherwise UV

damages eyes or skin when it is working.

Diagram of disassembly

(1) Take off back panel, take out HEPA, activated carbon and photo catalyst filter.

(2) use forefinger and thumb hold the UV lamp, rotate for 90 clockwise or

anticlockwise, then take it out.

Take off cover and filter

Diagram of installation

(1) Use forefinger and thumb hold the UV lamp, and then put it into UV lamp bracket

rotate for 90 clockwise or anticlockwise, installation finished.

Install UV lamp

Benzene

Acohol

Alkalescence

Decontamination

Scour

power

disassembly UV lamp

Installation finished

F A Q

Please kindly check as below before you send out for repair.

Abnormality

·Check if the plug has disconnected from the socket.

Connect the power again.

Does not work

·Check if the front panel is installed completely.

Recover the front panel carefully.

Continuously working

·It maybe because of IC interference.

and can not stop.

Unplug the power and restart the unit after

The LED is in red all

15 minutes later.

the time

HEPA filter is dirty.

The dirt in the air

Clean the HEPA filter or replace with a new one.

is not removed

and it is noisy

If the problem still exist after the above inspection,please

disconnect the power and send for repair.

Inspection items