American Recorder OAS-4000 Series Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} American Recorder OAS-4000 Series. American Recorder OAS-4000 Series 2 pagina's. 2ru led indicator signs

Pagina afdrukken

Congratulations on your purchase of an AMERICAN RECORDER TECHNOLOGIES

LED INDICATOR SIGN. INDICATOR SIGNS are the perfect solution for alerting

others that important broadcast, performance, recording, lessons, rehearsals,

services, conferences, interviews and proceedings are in progress. This product

utilizes a high-efficiency LED design for long-use life and low energy consumption.

The 2RU size sign fits and standard equipment rack. The optional enclosure has a

sleek and slim design and is easy to install. No special tools or equipment is

required for the installation.

IMPORTANT SAFETY PRECAUTIONS

Use only as intended. Should only be used by qualified individuals.

CAUTION: Risk of electrical shock! Do not use near water or if you are wet.

Intended for indoor use only. Use in dry, ventilated area free of excessive

dust, humidity, flammable materials, corrosive fumes and conductive contaminants.

Power supply is for 110-220 volt AC (input), 60 Hz to 9 volt DC (output). Can be

used with other 9VDC power sources (max 1 amp) only.

WARNING: Do not use if the powered cord or extension wire is worn or damaged.

PLASTIC LENS CARE: Do not use harsh chemicals, abrasives or glass cleaners

on the plastic lens. Use AMERICAN RECORDER Optical Grade Micro Fiber

Cleaning Cloth. Visit www.AmericanRecorder.com for more information.

KEEP THIS PRODUCT OUT OF THE REACH OF CHILDREN

The information contained in this document is subject to change without notice.

American Recorder Technologies, Inc. makes no warranty of any kind with regard

to this material, including, but not limited to, the implied warranties of merchant-

ability and fitness for a particular purpose. Not liable of errors contained herein or

for incidental or consequential damages in connection with the furnishing,

performance, or use of this material.

WARRANTY

AMERICAN RECORDER TECHNOLOGIES, INC. (ART) includes with this product a

limited one year guarantee, free from defects in manufacture and workmanship to the

original owner. Warranty does not apply to misuse, abuse, neglect, accident, improper

use, etc. ART reserves the right to make such determination on the basis of factory inspection.

A valid return authorization number must be obtained from ART customer service department

for all factory warranty service. All warranty repairs must be returned prepaid. (COD's will be refused).

Parts List: (1 ea.) LED Sign Box with Panel

NOTE: Care should be taken

when running cable through

door jams so wire does not

get pinched or damaged.

CONNECTIONS:

OPTIONAL 25' EXTENSION CABLE IF REQUIRED (sold separately)

OPTIONAL WALL MOUNTING: (enclosure model only)

TO ACCESS MODULAR PLUG & POWER SUPPLY, OPEN, REMOVE TWO RACK SCREWS LOCATED ON

THE FRONT RIGHT OF HINGED PANEL. USE CAUTION WHEN SWINGING PANEL OPEN.

Tools required

#8 Wood Screw

1. Find a flat location for mounting sign to wall.

2. With a ruler or tape measurer, measure and mark the wall area for the mounting holes which are 16" apart. Additionally,

a level can be used to assure your sign will be parallel to the door jam and ceiling.

3. For attachment directly to wood or studs, drill a 1/8" hole and use the supplied #8 screws. For drywall, drill a 7/32" hole

and gently tap in supplied plastic retainers and then screw in the #8 screw into retainer.

4. The head of the screw should be spaced 1/4" away from the wall in order to allow the SIGN BOX's keyhole cutouts to slide

over and down the back of the enclosure. Assure power cord is not crimped, crushed or shorted when mounted.

(1 ea.) 110~220vAC(input) to 9vDC (output) power supply

(1 set) Mounting Hardware (only with enclosure models)

OPTIONAL ADD-ONS

FLASHER

MODULE

NOTE: DO NOT PLUG IN POWER SUPPLY INTO WALL SOCKET

UNTIL ALL CONNECTIONS HAVE BEEN MADE. The power supply

has a 6 foot cord. Wires are color coded, red or white for positive

and black for negative, as shown in diagram. Connect to green

modular plug as shown in diagram below.

GND

Modular Plug

+9-24DC

16"

KEYHOLE

CUTOUTS

Phillips

Screwdriver

Plastic retainer

+ - + -

INPUT OUTPUT

POWER

OFF

FLASH

MOMENTARY

110V ~ 220VAC

POWER

SUPPLY

1/8"

Drill bits

Cordless Drill

7/32"