American Rotary AMP series Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} American Rotary AMP series. American Rotary AMP series 6 pagina's. Phase converter

Pagina afdrukken

DANGER: HIGH VOLTAGE

Electric shock could result in death or injury.

Please wait 30 minutes before servicing.

This manual is to serve the purpose of providing recommendations for proper performance

but is not to supersede or replace local or national electric codes.

WARNING! READ BEFORE STARTING CONVERTER!

If this phase converter does not start in less than 2 seconds, TURN IT OFF!

-All loads INCLUDING TRANSFORMERS must be DISCONNECTED before starting the phase converter

each time. This includes small control transformers that run controls inside your equipment. Failing

to meet this condition accounts for 99% of starting problems and can result in damage to the

starting capacitors.

-This converter is quiet. If it does not sound quiet and smooth, TURN IT OFF!

-Before connecting load, verify proper function of the phase converter. This will ensure the

protection of the phase converter and your equipment.

This policy covers the return of GENTEC/American Rotary products (excluding warranty returns,

which are covered by a separate policy). Under this policy, original Purchaser may return product to

GENTEC LLC with its PRIOR APPROVAL*, for credit under the following terms and conditions:

Product MUST BE in its original UNOPENED, UNMARKED carton.

Any product whose carton has been opened (seal broken), installed, or has been marked on in any

way is not considered suitable for resale, and will not be accepted for credit.

The unit must have been purchased within thirty (30) days of the date it is received by

GENTEC/American Rotary. Customers must return the product to the GENTEC/American Rotary

warehouse, freight prepaid. The product carton should be packed in the same condition as it was

shipped, with adequate protection from damage. Upon receipt, the product will be inspected,

tested, and evaluated. If the package is found not to be in "as-new" resalable condition, the

customer will be notified, and will be offered the option of having the product returned to them,

freight collect.

Valid returns will be credited the original purchase price minus a restocking charge of 25%. In

addition, the price of any replacement parts will be subtracted.

returnable.

Risk of Electric Shock.

PRODUCT RETURN POLICY

Custom products are not