Air & Allied Sales UGC3005 Gebruiksaanwijzing - Pagina 2

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Air & Allied Sales UGC3005. Air & Allied Sales UGC3005 10 pagina's. Solvent based spray gun cleaner

Pagina afdrukken

Setting the machine up

PLEASE NOTE: It is advised that an air, dirt and water trap filter is fitted (786

as shown on the front page). This will protect the valves and cylinder from dirt

and water contamination.

It is possible to obtain 100/150 gun washes from a 25 litre drum of solvent but this is dependent

upon how much paint material is left in your spray gun pot. We recommend regular changing of the

solvent to ensure absolute cleanliness of your spray gun.

Position machine in a well ventilated area. The extraction outlet will accept 3" (75mm) hose and

should be connected to an existing system or taken to the external part of a building and vented via

the atmosphere. Hose and a range of adaptors are available direct from Unic International.

The machine will take 20, 25 or 30 litre solvent containers. When installing 25 & 30 litre containers

we advise that you raise the adjustable corner legs.

Connect the machine to the air supply. All air connections are located on the right hand side of the

machine when viewed from the front.

Connect earth wire on rear of machine to suitable earthing point.

Air Supply Pressure: 40 to 90 PSI. 2.75-6.9 bar, 3-kg / cm

The Unic range of Gun Cleaning Machines are Category 2 equipment that is suitable for

Apparatus Groups (Gas groups) IIA, IIB and IIC, with a temperature class of T6.

[email protected]

Thread size: 1/4" BSP

Air & Allied Sales (Pacific) Pty Ltd