Akura APL2YR2068U Snelstarthandleiding - Pagina 2

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Akura APL2YR2068U. Akura APL2YR2068U 2 pagina's.

WATCHING TV (basic operation)

11.

To select a channel either enter the number of the channel using the

number buttons on the remote control or scroll through the channels

using the channel CH+/- buttons.

12.

To view analogue TV channels press the SOURCE/INPUT button to

display the source menu. Using the cursor ▲ / ▼ buttons highlight TV

on the menu and press OK to select. To view digital TV channels select

DTV on this same menu.

13.

To check the list of channels stored, press the "OK" button to display

the channel list and use the cursor ▲ / ▼ buttons to move up and down

the display. To select a channel, highlight the channel on the list and

press "OK" to confirm.

14.

Adjust the volume to the desired level using the volume or cursor ◄ /

►buttons. The sound can be silenced by pressing the MUTE button on

the remote control and a mute symbol will appear on the screen. Press

the MUTE button a second time to restore the sound.

15.

To switch off the TV for short periods, press the POWER button. The

TV will go into standby mode and the LED indicator will change to red.

If not using the TV for extended periods turn off at the mains switch to

conserve electricity, all settings will be retained.

Wall Mounting

To mount the TV on a wall you need to purchase a VESA Standard (100mm) bracket.

Mount the TV to the wall bracket using 4 x M4 x 10mm set screws. (Do NOT use longer screws as the internal parts of

Akura accepts no responsibility for damage, caused to or by, incorrect mounting of the wall bracket.

There are many variations of Wall Mounting Brackets. The "ARM" variety allow a greater movement of the TV into the

viewing angle required.

The "Fixed Tilt" variety allow up and down Tilt.

The Fixed "Non Tilt" variety are fixed very close to the wall. To ensure suitable clearance of the Mains Plug, 4 x spacers

are provided. Attach these to the TV cabinet back and tighten before fitting the Wall Bracket plate.

For advanced operation of this TV please consult the Instruction Manual.

Should you have difficulty in operating this unit, please consult the Trouble Shooting Guide in the Instruction Manual.

If you suspect a fault, please contact the Customer Help Line.

Remove the screws as shown below (Fig 11).

Mount the wall bracket as described by the manufacturer.

the TV may be damaged).

Fig.11

Fig.10