BOBPERRY AUDIO Ducker 2 Handmatig - Pagina 5

Blader online of download pdf Handmatig voor {categorie_naam} BOBPERRY AUDIO Ducker 2. BOBPERRY AUDIO Ducker 2 13 pagina's.

Bob Perry Ducker 2 – Manual – Page 5/12

Threshold Line

Whenever hovering over the Threshold dial, or over the Waveform Display itself, the

Threshold Line is displayed. You can use your mouse or trackpad to set the Threshold

directly on the Display.

ATTACK

Time the Ducker will take to reach the set gain reduction value after being triggered by the

Aux Signal signal exceeding the threshold. The higher the attack value, the longer it takes the

Ducker to reach the final gain reduction.

HOLD

Time the Ducker will keep its full gain reduction even when the threshold is not exceeded

anymore. When the threshold gets exceeded again during hold time, the hold duration will be

extended accordingly.

RELEASE

Time the Ducker takes to revert back to its original state.

Please note: Very short Attack and Release times might cause distortion when working with

low frequencies. This might happen when the Attack and/or Release are shorter than the

frequencies' oscillating period.

INPUT GAIN

Adjusts the main input signal's level if a plug-in in the signal chain has a high or low output.

Most of the time you won't need to use it. It will take a very high level (>1500 dB) to create

distortion within Bob Perry Ducker 2.

VST is a software and trademark of Steinberg Media Technologies GmbH.

20210113160815