12trace GeoChaser Control Gebruikershandleiding - Pagina 2

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 12trace GeoChaser Control. 12trace GeoChaser Control 7 pagina's.
Ook voor 12trace GeoChaser Control: Gebruikershandleiding (8 pagina's), Handmatig (9 pagina's)

12trace GeoChaser Control Gebruikershandleiding
2.1 Power supply and contact detection
The red wire is plus 12 / 24V and the black wire is the minus or ground. The orange wire
is for the contact detection. This detection is necessary to activate a ride and ensures a
lower energy consumption once the vehicle is switched off. Connect the orange wire to a
socket that has voltage only when the ignition switch of the vehicle is on.
3. Ibutton interface
Color
Description
Gray
White
contact
Brown
+led
Yellow
- led
Green
NC
To link drivers to keys, use the 'Key holders' item in the
navigation menu. Here you can enter new keys and link
drivers to them. Also unknown keys used are visible here,
after which a new driver can be added.
You can read the Ibutton code from the Ibutton as shown in the picture.
4. Account
Your Geocontrol must still be activated by logging in to an account. The SIM card is also
activated when registering. This can take up to half an hour, which is why we
recommend activating the account before installation. The activation procedure
distinguishes between new and existing users.
4.1 New user
New users must first create an account on www.12trace.nl. Go to the site, click on the
"login" button and then on "create account". You will be asked to enter a number of
details. You need the product code for this. The product code can be found on the
bottom of the GeoControle.
Engels V1.7
An Ibutton is used for driver identification and/ or
immobilizer. This Ibutton is considered a unique key
and must be kept on the Ibutton holder. With a
correct reading, a red light will be visible in the
reader a number of times.
Note
Connect to gray wire interface box
Connect to white wire interface box
Connect to red wire interface box
Connect to Yellow wire interface box
Do not connect the green wire!
Pagina 2 van 7
laatste wijziging: 12-47-2019