BobsCNC E3 Handleiding voor probleemoplossing - Pagina 12
Blader online of download pdf Handleiding voor probleemoplossing voor {categorie_naam} BobsCNC E3. BobsCNC E3 16 pagina's. Cnc router engraver bearing and rail dust kit
Ook voor BobsCNC E3: Handmatig (8 pagina's), Snelstarthandleiding (3 pagina's)
Pagina afdrukken
- 1. Table of Contents
- 2. My Stepper Motors Are Running Backward
- 3. My Z Axis Is Not Homing Correctly
- 4. My E3 will Not Home Correctly (Diagnosing Home Switches)
- 5. My Firmware Does Not Seem to be Working
- 6. I Tried to Use Easel, Now My Machine Does Not Work Correctly
- 7. I Get and Error When I Run a G-Code File Made with F-Engrave
- 8. My Z Stepper Motor Wobbles Excessively
- 9. My Machine Seems to be Skipping some Commands
- 10. What Are the Alarm Code Descriptions
- 11. How Do I Change My Current Setting on the Stepper Motor Drivers
- 11. Setting the Current on the A4899 Stepper Motor Driver with a Volt Meter
- 11. Setting the Current on the A4899 Stepper Motor Driver Without a Volt Meter
- 12. The Dewalt Motor Shaft Came out During Assembly. (Dewalt Brush Remove and Replace)
Brush Spring
Remove the brush and repeat for the other side.
Motor brush