Euro-Line Solar me2solar Xpedition Instructies

Blader online of download pdf Instructies voor {categorie_naam} Euro-Line Solar me2solar Xpedition. Euro-Line Solar me2solar Xpedition 4 pagina's.

Pagina afdrukken

Please read the following instructions before operating your Aurora Pro / Xpedition solar power panel.

Aurora Pro / Xpedition converts sunlight directly into 12V

electricity - ideal for recharging consumer electronics and

maintaining vehicle batteries.

PRODUCT SPECIFICATIONS

Part Number

21101

Module

Aurora Pro 12

Size, Folded (cm)

22.9 x 12.7 x 1.78

Size, Unfolded (cm)

74.9 x 45.7 x 0.07

Weight

400g

Maximum Power

12 Watt

Nominal Voltage

12 Volt

Maximal Current

800 mA

PRODUCT SPECIFICATIONS

Part Number

21210

Module

Xpedition 30

Size, Folded (cm)

25.7 x 21.6 x 3.05

Size, Unfolded (cm)

113 x 54.6 x 3.05

Weight

830g

Maximum Power

30 Watt

Nominal Voltage

12 Volt

MPPT Voltage

18.8 Volt

Nominal Current

1500 mA

Open Circuit Voltage

28 Volts

Short Circuit Voltage

2.2 Amps

The overall performance of the solar charger is

dependent on a variety of conditions including season,

orientation with direct sunlight, cloudy conditions,

temperature and shadowing. As a result, providing

"typical" performance parameters is dependent on the

placement of the solar charger.

Aurora Pro Contents List

• Aurora Pro solar panel

• Instructions

• 12V Cable Set

• 2.4m extension cable, 12V FCLA, 12V CLA,

Battery Clamps, Barrel Connector

• 12V-5V USB adapter

• USB device adapter

• 8 Device Tips

• Mini-USB, Micro-USB, 2x Nokia, 2x Samsung, LG

and Apple iPod Dock

Xpedition Contents List

• Xpedition solar panel

• Instructions

• 12V Cable Set

• 2.4m extension cable, 12V FCLA, 12V CLA,

Battery Clamps, Barrel Connector

• Charge Controller

Care and Maintenance

Although the solar charger is ﬂexible, ONLY FOLD the

natural creases in the all-cloth portions of the panel.

Euro-Line Solar GmbH"

Aurora Pro / Xpedition Instructions

Do not fold with solar cells facing outward.

Do not fold or crease the solar charger on sharp

edges or objects.

Do not crumple or improperly bend panels

Do not excessively ﬂex or bend the solar charger as

this could cause the plastic layers to crease or

21102

bubble.

Aurora Pro 25

Do not machine wash, machine dry or dry clean the

27.9 x 21.0 x 1.78

solar charger.

105 x 54.6 x 0.07

Do not attempt to recharge non-rechargeable

batteries.

770g

Do not attempt to open junction box or attempt to

25 Watt

repairs of any kind on the solar charger, this will void

the warranty.

12 Volt

How to use

1500 mA

Caution: Ensure that you completely understand this

instruction manual before using the Aurora Pro solar

panel.

21220

1.Consumer Electronics

1.1. Handheld USB-Chargeable devices, i.e. cell

Xpedition 62

phones, GPS, MP3-Players, USB AA/AAA/Li-Ion

36.8 x 21.6 x 3.6

battery chargers, etc.

133 x 76.2 x 0.25

Recommended use: Use 5V USB adapter and device

adapters to charge devices directly.

1450g

62 Watt

1.2. 12V Devices, i.e. Satellite phones, 12V AA/AAA/

Li-Ion battery chargers, BGAN Satellite Terminals,

12 Volt

GPS, Radio, etc.

20 Volt

Recommended use: Use included FCLA adapter or

barrel connector to charge devices directly.

3100 mA

CAUTION: Care MUST be taken by the user

28 Volt

connecting the Aurora Pro 25 and Xpedition to small

4.2 Amps

electronic devices without the 5V USB adapter. The

user must consult with the device manufacturer prior

to connecting electronic devices to the Aurora Pro 25 /

Xpedition directly to ensure that the device can be

directly connected to a solar module with an open

circuit voltage as high as 25 volts (Aurora Pro 25)

and 28 Volts (Xpedition).

2.Vehicle Batteries

2.1. Application: Trickle charge and maintain car/RV/

marine batteries. Use charge controller.

Recommended use: Connect 12 V vehicle power plug

to the 2.4m extension accessory cable and then to the

Aurora Pro. Insert the 12 V vehicle power plug directly

into your car!s cigarette lighter outlet. Place the solar

charger so that it receives direct sunlight.

Applied with care, battery accessory cable may also

be used and attached directly to the battery from the

to the Aurora Pro. It is the user!s responsibility to

consult the battery manufacturer for the

recommended charging method.

Troubleshooting

• Inspect the connections between Aurora Pro /

Xpedition and the device you are attempting to

charge.

• Inspect all plugs, outlets, clamps, connectors and

cables to ensure they are not damaged.

• If the connections are all secure, use a volt meter or

12V test light to check voltage between the positive

and negative electrodes. This check should be done

using the 12V vehicle power plug.

• For vehicle and AA/AAA charging, check to make

sure that the battery is in good condition. Over time

battery performance decreases. If the battery

performance is weakened, the battery may need to

be replaced.

Note: Some portable electronics such as computers

require more power (current) than the solar power

produces. If problems persist you may require a larger

solar panel.

FAQs

How do i know that my Aurora Pro / Xpedition solar panel

is working?

Check the charge indicator light or bar on the handheld

electronics or accessory. For battery charging, the

product can be tested with a volt meter.

Will this product drain my battery at night?

No. The Aurora Pro has a built-in blocking diode that

prevents the solar array from discharging your battery at

night.

What happens if the Aurora Pro / Xpedition gets wet?

The Aurora Pro is made from rip-stop nylon, a water

resistant material. Wipe the product dry with a clean, dry

cloth and allow the product to dry before folding for

storage. DO NOT keep the product in or underwater.

Can I leave the Aurora Pro / Xpedition solar panel outside

for a continual use?

Yes, the Aurora Pro / Xpedition are designed for portable

outdoor use. However, to prolong the life of the solar

panel, we recommend once your application is ﬁnished

charging, fold and store it when not in use.

Warranty

The Aurora Pro / Xpedition solar charger carries a two

(2) year limited warranty against defects in workmanship

and materials affecting performance. The manufacturer

agrees to replace the defective product free of charge

within the stated warranty period, when returned by the

original purchaser with proof of purchase. This product is

not guaranteed against wear or breakage due to misuse

and/or abuse. In addition, any units that show signs of

creasing or folding on the active photovoltaic areas are

not covered under warranty.

Note: Since the conditions or methods of operation, use

and maintenance of solar chargers are beyond its control,

the Manufacturer does not assume responsibility and

expressly disclaims liability for loss, damage, or expense

arising out of or in anyway connected with such

operation, use or maintenance.

WARNING - Aurora Pro / Xpedition generates

electricity when exposed to light, even when not

connected in a circuit. Shocks and burns can result from

contact with module output wiring, misuse, or improper

connections. Contact battery manufacturer for questions

on battery speciﬁcations before charging.

The Aurora Pro / Xpedition will NOT work with

indoor lighting. The photovoltaic process requires UV

light, i.e. sunlight to perform. It is also recommended

NOT to use the solar panel through a glass windows as

glass is a natural ﬁlter of UV light and power output will be

signiﬁcantly decreased.

These operating instructions represent the technical

status at the time of printing. Changes in technology and

equipment reserved.