Domus 25012 Installatiehandleiding - Pagina 4

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Domus 25012. Domus 25012 4 pagina's.

How to change into MANUAL OVERRIDE CONTROL MODE

1. When power is on, the PIR detector enters into the "WARM-UP" periods for about 1 minute, then

automatically changes into AUTO MODE.

2. During AUTO MODE, by switching the ON/OFF main switch twice within 3 seconds and then switching it

on again, the PIR detector will automatically change into MANUAL MODE from AUTO MODE. In MANUAL

MODE, the Lamp(s) will remain ON, not affected by duration time and Lux control level.

3. During MANUAL MODE or AUTO MODE, by switching off the ON/OFF main switch for over 6 seconds and

then on again, the PIR detector will reset to WARM-UP periods. Please note: the periods of "WARM-UP"

maybe shorter than 1 minute.

POWER ON

MANUAL MODE

Specifications

Detection range: Max. 12 metres at 180°scan

Duration Time adjustment: (10±5) seconds to (4±1) minutes.

Detection circuitry: Passive Infra-Red (PIR)

Power required: 240V AC, 50HZ

Maximum load: 2x13Watt LED.

Weatherproof: IP44

AUTO MODE

29-31 Richland St. Kingsgrove. Sydney NSW 2208 Australia

Phone: 02 9554 9600

Fax: 02 9554 9433

www.domuslighting.com

Installation Manual