American Standard 2647 Series Handleiding voor installatie en gebruik - Pagina 6
Blader online of download pdf Handleiding voor installatie en gebruik voor {categorie_naam} American Standard 2647 Series. American Standard 2647 Series 16 pagina's. Aths with integral apron
Ook voor American Standard 2647 Series: Handleiding voor installatie-instructies (12 pagina's)
Pagina afdrukken
TO MAINTAIN THE ORIGINAL LUSTRE OF YOUR AMERICAN
STANDARD ACRYLIC THERAPEUTIC BATH, A WEEKLY
CLEANING IS NECESSARY TO REMOVE ANY DIRT AND
SOAP FILM.
"AMERICAN STANDARD CLEANER" APPLIED WEEKLY WITH A
DAMP CLOTH OR SPONGE WILL KEEP THE SOAP FILM
FROM BUILDING UP. SHOULD THE BUILD-UP BE HEAVY,
APPLY CLEANER AND LET SOAK FOR 5 MINUTES. THE USE
OF A TEFLON SCRUBBING PAD WILL BREAK UP ANY DIRT
OR SOAP FILM WITH GENTLE RUBBING. RINSE WITH CLEAN
WATER AND TOWEL DRY.
HARD WATER STAINS MAY ALSO BE REMOVED WITH
"AMERICAN STANDARD CLEANER."
TWICE YEARLY, A THOROUGH CLEANING OF THE ENTIRE
SURFACE IS RECOMMENDED. AFTER ALL THE DIRT AND
SOAP FILM HAS BEEN REMOVED WITH AMERICAN
STANDARD CLEANER, APPLY A COAT OF AUTOMOTIVE
PASTE WAX TO THE ENTIRE SURFACE OF THE BATH, THEN
757222-A
Cleaning Instructions
BUFF. THIS WILL HELP SHED THE WATER OFF THE
SURFACE, REDUCING THE AMOUNT OF SOAP FILM
BUILD-UP AND WILL MAKE WEEKLY CLEANING EASIER.
ANOTHER TIP FOR EASIER CLEANING IS TO TOWEL DOWN
THE BATH AFTER EACH USE.
TO REMOVE PLASTER, WET IT DOWN AND GENTLY SCRAPE
IT WITH A SMALL WOODEN BLOCK. REMOVE PAINT AND
OTHER STAINS WITH TURPENTINE OR MINERAL SPIRITS.
SHOULD UNUSUAL ABUSE CAUSE SCRATCHES OR DULL
SPOTS, RUB THE SURFACE WITH WHITE AUTOMOTIVE
RUBBING COMPOUND, AND APPLY A LIGHT COAT OF
AUTOMOTIVE PASTE WAX AND BUFF.
DO NOT USE ABRASIVE CLEANERS – USE "AMERICAN
STANDARD CLEANER" WEEKLY AND YOUR THERAPEUTIC
BATH WILL MAINTAIN THE FULL LUSTRE IT HAD WHEN YOU
FIRST BOUGHT IT. "AMERICAN STANDARD CLEANER" IS
AVAILABLE AT BETTER PLUMBING STORES.
(6)