American Standard Ellisse 2709.002 Specificatie - Pagina 2
Blader online of download pdf Specificatie voor {categorie_naam} American Standard Ellisse 2709.002. American Standard Ellisse 2709.002 2 pagina's. Oval whirlpool & bathing pool, high gloss
Ook voor American Standard Ellisse 2709.002: Specificatieblad (2 pagina's)
Pagina afdrukken
240 mm
(9-7/16)
SEE FTTG.SPECS
FOR DIMENSION
C L OF SUPPLIES
978 mm
(38-1/2)
489mm
(19-1/4)
76mm
(3)
C L OF DRAIN
OUTLET
C/L OF
SAFE-T-HEATER
VALVES
REMOVABLE BLANK
86mm
(3-3/8)
102mm
305mm
(4)
(12)
38mm
(1-1/2)
502mm
(19-3/4 )
464mm
(18-1/4)
1-1/2 N.P.T.M.
THREADS
1-1/2 O.D.
TAILPIECE
GENERAL SPECIFICATIONS FOR 2709 WHIRLPOOL
69-1/4 x 38-1/2 x 19-3/4 In.(1759 x 978 x 502mm)
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT 3 )
WHIRLPOOL ELECTRICAL SPECIFICATIONS
SYSTEM II PUMP
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUPPORT
OF BATH BY INTEGRAL FEET. NO ADDITIONAL SUPPORT IS REQUIRED. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
▲
CUTOUT TEMPLATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
ON SYSTEM II: CONTROL MODULE TO BE MOUNTED BEHIND ACCESS PANEL, A MINIMUM OF 152mm (6) ABOVE ROUGH FLOOR.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 / CSA
Certified. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaflet.
© 2008 AS America Inc.
1759 mm
(69-1/4)
OUTLINE OF
CUTOUT
ON/OFF
SWITCH
305mm(12) X 229mm(9)
CUTOUT IN FLOOR FOR DRAIN
PROVIDE ACCESS
TO PUMP FOR
SERVICING ON ALL
INSTALLATIONS
C/L OF
SHOWER ARM
C/L OF
SPOUT
1651-1981mm
(65-78)
OPTIONAL
INTEGRAL
FEET
SUPPORT
ROUGH
FLOOR
35mm
(1-3/8)
98mm
(3-7/8)
107 Lbs. (49 Kg.)
640 Lbs. (291 Kg.)
64 Gal. (243 L)
53 Gal. (201 L)
45 x 23 In. (1143 x 584mm)
63 x 32 In. (1600 x 813mm)
13 In. (330mm)
35 Lbs./Sq.Ft. (166 Kgs./Sq.m)
2.1 HP, 15.6 AMPS, 120V.
WHIRLPOOL AND BATHING POOL
SEE FTTG.SPECS
FOR DIMENSION
C L OF SUPPLIES
PUMP
978 mm
(38-1/2)
489mm
(19-1/4)
76mm
(3)
95mm
(3-3/4)
305mm
(12)
38mm
(1-1/2)
502mm
(19-3/4 )
464mm
(18-1/4)
GENERAL SPECIFICATIONS FOR 2709 BATHING POOL
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
25.6
(PROJECTED AREA)
49.4
PTS.
CUBE (FT 3 )
H50
ELLISSE OVAL™
1759 mm
(69-1/4)
240 mm
(9-7/16)
305mm(12) X 229?mm(9)
CUTOUT IN FLOOR FOR DRAIN
C L OF DRAIN
OUTLET
SHOWER ARM
C/L OF
VALVES
C/L OF
102mm
SPOUT
(4)
INTEGRAL
FEET
SUPPORT
1-1/2 N.P.T.M.
35mm
THREADS
(1-3/8)
98mm
1-1/2 O.D.
(3-7/8)
TAILPIECE
69-1/4 x 38-1/2 x 19-3/4 In.
(1759 x 978 x 502mm)
611 Lbs. (275 Kg.)
45 X 23 In. (1143 x 584mm)
63 x 32 In. (1600 x 813mm)
34 Lbs./Sq.Ft. (165 Kgs./Sq.m)
HIGH GLOSS
OUTLINE OF
CUTOUT
C/L OF
1651-1981mm
(65-78)
OPTIONAL
ROUGH
FLOOR
77 Lbs. (35 Kg.)
64 Gal. (243 L)
13 In. (330mm)
25.6
49.4
Rev. 2/08