American Standard Savona Elite Corner Whirlpool 2902EC Specificaties
Blader online of download pdf Specificaties voor {categorie_naam} American Standard Savona Elite Corner Whirlpool 2902EC. American Standard Savona Elite Corner Whirlpool 2902EC 2 pagina's. High gloss acrylic corner whirlpools
Pagina afdrukkenSAVONA ELITE™ CORNER WHIRLPOOL
Comfortable two person design with molded-in
back support position, dual armrests and
integral seat.
2902E (specify White 020, Bone 021, or
Linen 222)
• Acrylic with fiberglass reinforcement
• 2.0 HP self-draining pump/motor
with dry run seal
• Eight multi-directional and flow adjustable
jets including:
Three high performance Ideal-flow™ Jets
Five interchangeable Flex-jets™
• Three silent air volume controls
• Deck-mounted On/Off control
• Complete factory installed and tested
whirlpool system
2902EC (specify White 020, Bone 021, or
Linen 222)
• Same as above with the StayClean™
whirlpool system featuring Antimicrobial
AlphaSan®
Nominal Dimensions:
58-3/4" x 58-3/4" x 22-1/2"
(1492 x 1492 x 572mm)
Installed Size: 82-1/2" x 69-1/2" x 22-1/2"
(2096 x 1765 x 572mm)
Components Needed:
Bath Filler*: (specify finish)
Bath Drain: BATH-DRAIN
(specify Chrome 002, Polished Brass 099,
or Satin 295)
Custom Accessories Available:
Pulse Jet Kit: PULSE-JET (two per kit, specify
White 020, Bone 021, or Linen 222)
Soft Jet Kit: SOFT-JET (two per kit, specify
White 020, Bone 021, or Linen 222)
E-Z-Install™ Whirlpool Heater - EZHEAT-100
Tile Bead Kit: TILE-BEAD
* See American Standard Faucet Selector
Revised 6/03
SAVONA ELITE™ CORNER
WHIRLPOOLS BY AMERICAN STANDARD
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• Underwriters Laboratories - Hydromassage
Bathtubs UL 1795
• ASME A112.19.7M for Whirlpool Appliances
• ANSI Z124.1 for Plastic Bathtubs
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
NOTE: Roughing-in dimensions and product specifica-
tions shown on reverse side of page.
NOTE: E-Z-Install™ Whirlpool Heater is designed to
maintain water temperature during operation. It will not
heat cold water to desired bathing temperature.
SPS 2902E
© 2003 American Standard Inc.
HIGH GLOSS ACRYLIC
HD-002