D3FY SPORTS Conqu3st Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} D3FY SPORTS Conqu3st. D3FY SPORTS Conqu3st 14 pagina's.

IMPORTANT CO2 & HPA AIR TANK SAFETY GUIDELINES

IMPORTANT C02 & HPA AIR TANK SAFETY GUIDELINES

•Only use Co2 or HPA Air Tanks that are made for the sport of

paintball

•The Co2/HPA Air Tank can fly off with enough force to cause

property damage, serious injury or death if the Valve

unscrews from the cylinder head. LOOK at the Valve when

removing the tank from the marker. Be sure that the valve is

turning with the tank rather than remaining stationary with the

marker's ASA.

STOP IMMEDIATELY

if the valve starts to unscrew from the

tank. Screw the tank back onto the marker's bottom ASA

adapter and contact a qualified airsmith for further assistance.

• Tank valves must only be installed or removed by qualified

personnel.

• All tanks must meet ASTM/CE/DOT/TC Standards

• See Co2 or HPA Air tank labels for retest dates. Tanks must

be retested periodically.

• Improper use, filling, storage, or disposal of all air tanks may

result in property damage, personal injury, and/or death.

• Always keep Air tanks out of reach from children or any

inexperienced person(s).

• Air tanks must only be filled by qualified and trained

personnel.

• Never alter the Air tank in any way.

• DO NOT expose pressurized cylinders to temperatures in

excess of 130˚F (54˚C).

• Any tank packaged with the product is intended for paintball

use only.

• Tanks heated to a temperature of 250F° degrees (121°C) or

more must be re-qualified or condemned.

• Do not expose tanks to corrosive materials and do not clean

with caustic cleaners.

• Co2/Compressed gas is dangerous, do not allow Co2/

Compressed gas to come in direct contact with your skin or

try to stop a leak by covering it with your hand.

• NEVER over pressurize a Co2 or HPA Air cylinder.

• A urethane O-ring is highly recommended before attaching

any air supply to the marker.

• Confirm that there is a urethane O-ring attached on the Co2/

HPA Air Tank Valve before attaching the tank to the marker. If