Da-Lite IDEA Screen Instructieboek - Pagina 7

Blader online of download pdf Instructieboek voor {categorie_naam} Da-Lite IDEA Screen. Da-Lite IDEA Screen 8 pagina's. For epson brightlink displays (16:9)
Ook voor Da-Lite IDEA Screen: Instructieboek (12 pagina's), Instructies (2 pagina's), Gebruiksaanwijzing (16 pagina's)

Pagina afdrukken

Wall Mounting Instructions for Screens with Full Length Tray

NOTE: The screen is shipped with two wall brackets. Screens

in widths of 84¾" and below receive (2) 28" wall brackets.

Screens above 84¾" in width receive (2) 44" wall brackets. Use

appropriate mounting hardware for the wall type and to

accommodate for the screen's hanging weight.

Secure the two wall brackets to wall studs at the desired

height. The outside edge of each wall bracket must be no

greater than 5" away from the left and right edges of the

screen frame. You will need at least 1" clearance above the

drilled holes to hang the screen.

No More

than 5"

Cleaning

The supplied cleaning cloth can be used to clean marks on the screen surface made by everyday dry erase marker usage. Use clean or

dry sections of the microfiber cloth when erasing the screen. This is important to prevent smearing on the screen while cleaning. To

clean persistent marks from dry erase markers, use the supplied Da-Lite spray cleaner and cleaning cloth. Windex Original spray cleaner

can be used to remove tough to clean or smeared areas. To clean permanent markers and other unintentional marks on the surface,

use the supplied Da-Lite spray cleaner and cleaning cloth or a melamine foam cleaning pad.

Screws (Not Supplied)

2. This step requires two people. Hang the screen on the wall

brackets (Figure 5). There is a lip on the back of the frame that

wedges itself into the wall brackets once fully installed.

3. Attach bottom of screen to wall through the mounting holes

located under the tray (Figure 5).

Wall Brackets

Figure 5

No More

than 5"