EKEMP MP200 Gebruikershandleiding - Pagina 9

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} EKEMP MP200. EKEMP MP200 12 pagina's. Portable thermal bluetooth printer

Pagina afdrukken
3.2
3.2
Basic
Basic
functions
functions of of of of using
functions
3.2
3.2 Basic

Basic functions

3.2.1
Power
on on
3.2.1
3.2.1
3.2.1 Power
Power
Power on
on
When turn off, press power button【POWER】for 2 seconds，the printer turned
on and entering working state. The power indicator (red light) flash.
Notice: If there isn't out of paper but feed light flashes that mean the
printer is running out of power. Please replace the battery or charge to
continue to use. Charging method is in 3.2.5(charge).
3.2.2
3.2.2
Power
Power
off
off
3.2.2
3.2.2 Power
Power off
off
When power on, press power button【POWER】for 2 seconds, the printer turned
off . All lights extinguish.
3.2.3
Self
detection
3.2.3
3.2.3 Self
3.2.3
Self detection
Self
detection
detection
User can detect printer any time to detect the printer current settings and
status.
Self detection method：Power off（if the printer is turned on），then press
【FEED】，then press【POWER】to turn on. Printer will print self-test page
with current status of the printer and printer setting and print example.
3.2.4
Feeding
manual
3.2.4
3.2.4
3.2.4 Feeding
Feeding
Feeding（manual
manual feed
manual
In normal operation, press【FEED】to start feeding. Feeding 250mm if there
have print black label in printing paper that printer recognized. Printer
will stop feeding automatically when printer feed to black label. Printer
feed will not affect by black label if set feeding length to 0.
3.2.5
3.2.5
Charger
Charger
3.2.5
3.2.5 Charger
Charger
The printer's battery will be consumed after using for a time. When battery
power is going to run out, feed light will blink and issue a warning sound.
It means it's time to charge. User have to charge when printer turned off
automatically in printing process such as to continue to use.
Charge as follow: Insert the charger's mains plug to electrical outlet of
220V、50HZ. Then insert charge plug into the charging socket begin to charge.
In charging, feed light will flash and charge indicator always flash until
the battery is full charged in power on status.
You can use the printer normally in charging process.
- 9 -
using
using
using
feed
feed）
feed
9