American Standard H2Optimum 288AA Handleiding voor installatie-instructies - Pagina 4
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} American Standard H2Optimum 288AA. American Standard H2Optimum 288AA 7 pagina's.
Pagina afdrukken
MAJOR WATER ADJUSTMENT
1
BODY
CLIP
INLET PIPE
Remove the clip as per the drawing.
MINOR WATER ADJUSTMENT
1
Slide tab in the "Open" direction
as shown in the drawing.
11
SINGLE FLUSH MODELS ONLY
Adjust water level to level indicated on
tank by turning water level adjustment
knob to move float cup up or down.
WATER LEVEL ADJUSTMENT (DUAL FLUSH TANK ONLY)
2
2
CLIP
SCREW
To reduce water level:
lower the float to the
desired height and rotate
the thumb screw
counterclockwise. This
will move the float down.
(As per drawing)
FILL VALVE
OR WATER
CONTROL
Unscrew the fill valve body
counterclockwise, push the
body up or down to the desired
height and refasten valve body
by turning clockwise.
SCREW
To increase water
level: Rotate thumb
screw clockwise, lift the
float and the water
level will correspond.
Set the float to the
desirable position.
(As per drawing)
WATER LEVEL
ADJUSTMENT KNOB
FLOAT CUP
FLAPPER
FLAPPER
WATER SUPPLY LINE
- 4 -
3
Install the clip as per the drawing.
3
Slide the tab to the "CLOSE"
position as per the drawing.
TRIP LEVER ROD
APPROXIMATE
WATER LEVEL
FLUSH
VALVE
CHAIN
FLOAT
OVERFLOW
TUBE
SEAL
TANK TO BOWL GASKET
BODY
CLIP
INLET PIPE
CLIP
REFILL TUBE
FLUSH
VALVE
7 3 01416 - 10 0 Rev. L 1 / 16