Canon 2711B062 Gebruikershandleiding - Pagina 14

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Canon 2711B062. Canon 2711B062 44 pagina's. Canon imageclass mf4350d: user guide

Pagina afdrukken

2 Set Up the Machine

Connect Power Cord and Turn On the Machine

Connect the power cord into the rear socket on

the back side of the machine and the wall

outlet, and press the [I] side of the main power

switch (A) to turn ON.

Do not connect the machine and the computer with a USB

cable at this time. Connect the machine and the computer

with a USB cable only during the software installation

procedure. (A USB cable is not used when the machine is

used via a network connection.)

The machine enters the standby mode.

1 0 0 %

T E X T / P H O T O

The LCD display turned OFF:

●

The machine may enter the Sleep mode while you are performing setup. Press

[Energy Saver] to turn the display back ON and continue the setup.

<SET PAPER AGAIN/SET TONER AGAIN> is displayed:

●

Make sure that the toner cover and scanning platform are closed properly. (See

"Install Toner Cartridge, " on p. 5.)

<CLOSE COVER/TONER COVER> is displayed:

●

Check the installation of the toner cartridge and the placement of the paper.

(See "Install Toner Cartridge, " on p. 5 and "Set Up Paper Cassette and Load

Paper, " on p. 8.)

L T R