Daan Tech VOLTZ TOYS DG86388 Gebruikershandleiding - Pagina 12

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Daan Tech VOLTZ TOYS DG86388. Daan Tech VOLTZ TOYS DG86388 17 pagina's. Lamborghini sian

Pagina afdrukken

How to insert batteries: Use a screwdriver to unscrew the back cover of

the remote. Install two AAA 1.5V alkaline type batteries according to the

diagram (batteries not included). Fix the battery cover with a screw.

How to remove batteries: Use a screwdriver to unscrew the back cover

of the remote. Open the cover and remove the two AAA 1.5V alkaline type

batteries. Close the battery cover, fix with a screw.

WARNING

• Do not charge non-rechargeable batteries for the remote.

• Batteries for the remote must be inserted with the correct polarity.

• When the remote is low in battery, please remove and swap the batteries

• Rechargeable batteries for the remote must be charged under adult su-

pervision.

• Rechargeable batteries must be removed from the remote before being

charged.

CHARGING PROCEDURES

• For safety purposes, charging must be done by adults.

• When initially assembled, connect the (red) battery wires under the

hood. Charge for 8-12 hours before using.

• The charging port is located on the dashboard. Follow the instructions to

charge the battery.

• If the car is starting to slow down, this indicates the battery is low. Re-

charge for 8-12 hours, maximum 20 hours. Do not overcharge or under-

charge.

• First, insert the charger into the charging port.

• Carefully insert the charger outlet into the power outlet. Please note the

car will not turn on when the car is connected.