EKHO EK-WL8-AU Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} EKHO EK-WL8-AU. EKHO EK-WL8-AU 6 pagina's. Wireless heat sensor
Ook voor EKHO EK-WL8-AU: Snelstarthandleiding (7 pagina's)

Pagina afdrukken
EKHO EK-WL8-AU Handmatig
EK-WL8-H/AU
WIRELESS HEAT SENSOR
STFV.425238.034-AU-UM rev. 14
10.08.2020
Page 4 from 6
TESTING
An alarm test can be performed with a magnet by
placing it onto the outside of the sensor (opposite
side to the base alignment marks) the sensor
should take around 1 second to activate.
A suitable heat test tool can also be used, please
follow the instructions to apply heat to the sensor
in the correct way.

ANALOG DATA

The device provides the translator module with analog data about the current air
temperature and voltage levels of its batteries. This information can be viewed in
the "Ekho Configuration" software.
By analyzing the voltage levels, you can manage maintenance procedures and
predict when you will have to replace the batteries. Please refer to the software
manual for full instructions on how to use the program for system maintenance.
WARNINGS & LIMITATIONS
Devices use high quality electronic components and plastic materials that are highly
resistant to environmental deterioration. However, after 10 years continuous
operation it is advisable to replace them to reduce the risk of reduced performance
caused by external factors. Ensure the devices are only used with compatible
control panels. Detection systems must be checked, serviced and maintained on a
regular basis to confirm correct operation.
Refer to and follow National Codes of Practice and other internationally recognized
fire engineering standards. Appropriate Risk Assessment should be carried out
initially to determine correct design criteria and updated periodically.

WARRANTY

All devices are covered by a 3-year limited warranty (does not apply to batteries).
The warranty is voided by mechanical or electrical damage caused by incorrect