Canon IMAGE RUNNER 5050 Eenvoudige bedieningshandleiding - Pagina 5

Blader online of download pdf Eenvoudige bedieningshandleiding voor {categorie_naam} Canon IMAGE RUNNER 5050. Canon IMAGE RUNNER 5050 44 pagina's.

Pagina afdrukken

Copying Function

Making a Copy

The following is an explanation of the basic procedure for copying a document. For more detailed procedures, see the
references to other guides.
Preparations
Regular Copy Basic Features screen
Press [Copy] to switch to the Copy function.
If the following screen is displayed, enter
the [Dept. ID] and [Password]
press
(Log In/Out) on the touch panel.
7
8
9
0
If Department ID Management or the SDL or SSO
login service is set, it is necessary to enter an ID and
password. (If an optional card reader is attached,
insert a control card.)
For more information, see Chapter 2, "Basic
Operations," in the Reference Guide.
7
Place Your Originals
Placed in the feeder
Placed on the platen glass
Place your originals.
If you have placed your originals on the platen glass,
close the feeder after placing your originals.
If necessary, set copy modes on the Regular Copy
Basic Features screen.
For more information on the copy modes you can
set on the Regular Copy Basic Features screen,
see p. 21 and p. 22.
To set the various copy modes, press [Special
Features].
For more information on the copy modes you can
set on the Special Features screen, see p. 21 and
p. 22.
You can also place paper in the stack bypass to
copy. (For more information, see Chapter 2, "Making
Prints Using the Stack Bypass," in the Reference
Guide.)
Specify the Number of Copies
4
5
6
7
8
9
0
Enter the desired number of copies (1 to 9,999)
with the numeric keys.
If you make a mistake when entering values, press
(Clear)
enter the correct values.
The number of copies you specify is displayed on
the right side of the Regular Copy Basic Features
screen.
To cancel, interrupt, or continue copying
To cancel copying
Press
(Stop).
To interrupt copying.
Press [Interrupt].
See "Interrupt Mode," in the Copying and Mail Box Guide.
Making a Copy
Start Copying
4
5
6
7
8
9
0
Press
(Start).
When copying is complete, remove your originals.
If the following screen is displayed, follow the
instructions on the screen and press
(Start) once
for each original. When scanning of the originals is
complete, press [Done].
If Department ID Management is set, press
(Log In/Out).
To make another copy while
printing
Press [Done].
Place the next original.
Press
(Start).
8