Canon ImageCLASS 2300 Setup - Pagina 4

Blader online of download pdf Setup voor {categorie_naam} Canon ImageCLASS 2300. Canon ImageCLASS 2300 8 pagina's. Digital multifunction imaging system
Ook voor Canon ImageCLASS 2300: Specificaties (2 pagina's), Setupblad (9 pagina's), Remote Ui Handleiding (44 pagina's), Specificatie (2 pagina's)

Pagina afdrukken

Install the toner cartridge.

1 Open the stack bypass.

3 Remove the toner cartridge from the bag.

Keep the bag in a safe place.

5 Hold the cartridge on a flat stable surface with

one hand, and pull out the seal completely

with the other hand.

7 Hold the cartridge by its handles (marked with

blue) and insert it in the machine horizontally

as far as it will go.

2 Slide out the left cover of the stack bypass.

4 Hold the cartridge with both hands and slowly

shake it sideways 1 and then back and forth

2 to distribute the toner inside the cartridge.

6 Remove the tape holding the orange

protective cover, and pull the release tabs on

the cover to detach it from the cartridge.

IMPORTANT

Do not touch the blue-green drum surface inside

the toner cartridge.

8 Close the left cover and the stack bypass.

Tabs

Protective cover