eKids StarWars SW-M23.2 Gebruiksaanwijzing - Pagina 7
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} eKids StarWars SW-M23.2. eKids StarWars SW-M23.2 12 pagina's. Dual alarm clock speaker system for mp3 players & smartphones
Setting Time and Calendar
1. Press and hold the Clock Adjust Button located on the back of the unit until the current time flashes on the display.
Press the
or
Button to adjust to correct time (holding the button for a few seconds will advance or reverse rapidly).
2. Remember to set the correct AM or PM time. The PM Indicator is located on the left side of the display; there is no
AM indicator.
3. Press the Clock Adjust Button again to adjust year. Press the
4. Press the Clock Adjust Button again to adjust month and date. Press the
is displayed. Holding the button for a few seconds will advance or reverse rapidly.
5. Press the Clock Adjust Button again (or no button within 10 seconds) to exit the time/calendar setting mode. You will
hear two beeps to confirm Time and Calendar setting are completed.
Using the Alarms
Setting the Alarms
This unit has a dual alarm system so you can set two separate alarms to different alarm times.
1. Press and hold the
Button until the current alarm time flashes in the lower part of the display. Press the
to set the alarm time. Remember to set the correct AM or PM time.
2. Press the
Button (or if no button is pressed within 10 seconds). Two beeps will confirm alarm time and exit alarm
setting mode. The alarm will be armed and the corresponding alarm icon will appear.
3. To set Alarm 2 just follow steps 1 - 2 using the
4. To wake to Aux-in audio device: Plug your audio device into the attached aux-in cable and place your device on the
backrest located on top of the unit. At the set alarm time, the unit will send a play command to the your device, and
music will start playing. NOTE: Some aux devices will not work with the aux-in alarm. Make sure to test your device in
aux-in mode before relying on it as a wake source. If the unit does not detect an aux audio device at the set alarm time,
the unit will default to buzzer alarm. The alarm cycle lasts for one hour; make sure you have enough music on your
audio device to last that long.
Reviewing, Arming and Disarming Alarm (Turn Alarm Function On and Off)
1. Once an alarm is set, it is armed and the lower part of the display will show the alarm time. If both alarms are armed,
the earliest alarm time will show.
2. To arm/disarm the alarm, just press the associated alarm button to toggle it on or off. If the alarm is armed, the related
alarm icon will appear in the upper part of the display.
Resetting the Alarm to Come on the Next Day
1. When the alarm is sounding, press the
Using the Unit
or
Button.
Button to stop alarm and reset it to come on the following day.
4
Button until the current year is displayed.
Button until the current month/date
or
or
Button