Ekinex EK-E12-TP Series Gegevensblad - Pagina 5

Blader online of download pdf Gegevensblad voor {categorie_naam} Ekinex EK-E12-TP Series. Ekinex EK-E12-TP Series 5 pagina's. Pushbutton
Ook voor Ekinex EK-E12-TP Series: Snelstarthandleiding (9 pagina's)

Pagina afdrukken

Square frame of

Form series

EK-FOQ-...

Square frame of

Flank series

EK-FLQ-...

Square plate

EK-PQS-...

Marks

• KNX

• CE: the device complies with the Low Voltage Directi-

ve (2006/95/EC) and the Electromagnetic Compatibility

Directive (2004/108/EC). Tests carried out according to

EN 50491-5-1:2010, EN 50491-5-2:2010

Maintenance

The device is maintenance-free. To clean use a dry cloth.

It must be avoided the use of solvents or other aggressive

substances.

Disposal

At the end of its useful life the product

described in this datasheet is classiﬁ ed

as waste from electronic equipment in

accordance with the European Direc-

tive 2002/96/EC (WEEE), and cannot

be disposed together with the munici-

pal undiﬀ erentiated solid waste.

Warning! Incorrect disposal of this product may

cause serious damage to the environment and hu-

man health. Please be informed about the correct

disposal procedures for waste collecting and pro-

cessing provided by local authorities.

Documentation

This datasheet refers to the release A1.0 of the ekinex

device EK-E12-TP..., and is available for download at

www.ekinex.com as a PDF (Portable Data Format) ﬁ le.

File name

STEKE12TP_EN.pdf

Documentation

This datasheet refers to the release A1.0 of the ekinex®

device EK-E12-TP..., and is available for download at

www.ekinex.com as a PDF (Portable Data Format) ﬁ le.

Warnings

• Installation, electrical connection, conﬁ guration and

commissioning of the device can only be carried out by

qualiﬁ ed personnel in compliance with the applicable

technical standards and laws of the respective countri-

• Opening the housing of the device causes the imme-

diate end of the warranty period

• In case of tampering, the compliance with the essential

requirements of the applicable directives, for which the

device has been certiﬁ ed, is no longer guaranteed

• ekinex

KNX defective devices must be returned to the

manufacturer at the following address: EKINEX S.p.A.

Via Novara 37, I-28010 Vaprio d'Agogna (NO) Italy

Other information

• This datasheet is aimed at installers, system integra-

tors and planners

• For further information on the product, please contact

the ekinex

[email protected] or visit the website www.ekinex.

com

• Each ekinex

the label. The serial number can be used by installers

or system integrators for documentation purposes and

has to be added in each communication addressed to

the EKINEX technical support in case of malfunctioning

of the device

• KNX

and ETS

sociation cvba, Brussels

documentation without notice.

Device release

A1.0

technical support at the e-mail address:

device has a unique serial number on

are registered trademarks of KNX As-

Updating

11 / 2015