Ekinex KNX EK-E32-TP Snelstarthandleiding - Pagina 5

Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Ekinex KNX EK-E32-TP. Ekinex KNX EK-E32-TP 5 pagina's. Pushbutton

Pagina afdrukken

Dimensions [mm]

Set rockers

EK-TRV-...

39,5

Set rockers

EK-TRO-...

Square frame form

series EK-FOQ-...

Square frame flank

series EK-FLQ-...

Marks

• KNX

• CE: the device complies with the RoHS III Directive

(2011/65/EU) and the Electromagnetic Compatibility

Directive (2014/30/EU). Tests carried out according to

EN 63044-5-1:2019; EN 63044-5-2:2019

Set rockers

EK-TQQ-...

39,5

Maintenance

The device is maintenance-free. To clean use a dry cloth.

It must be avoided the use of solvents or other aggressive

substances.

Disposal

At the end of its useful life the product

described in this datasheet is classified

as waste from electronic equipment in

accordance with the European Direc-

tive 2012/19/EU (WEEE recast), and

cannot be disposed together with the

municipal undifferentiated solid waste.

Warning! Incorrect disposal of this product may

cause serious damage to the environment and hu-

man health. Please be informed about the correct

disposal procedures for waste collecting and pro-

cessing provided by local authorities.

Documentation

This datasheet refers to the release 6.0 of the ekinex

device EK-ED2-TP-... and to the release 1.0 of the ekinex

device EK-E32-TP-..., and is available for download at

www.ekinex.com as a PDF (Portable Data Format) file.

File name

STEKED2E32TP_EN_v.4.2.pdf

Warnings

• Installation, electrical connection, configuration and

commissioning of the device can only be carried out by

qualified personnel in compliance with the applicable

technical standards and laws of the respective countri-

• Opening the housing of the device causes the imme-

diate end of the warranty period

• In case of tampering, the compliance with the essential

requirements of the applicable directives, for which the

device has been certified, is no longer guaranteed

• ekinex

KNX defective devices must be returned to the

manufacturer at the following address: EKINEX S.p.A.

Via Novara 37, I-28010 Vaprio d'Agogna (NO) Italy

Other information

• This datasheet is aimed at installers, system integra-

tors and planners

• For further information on the product, please contact

the ekinex

technical support at the e-mail address:

[email protected] or visit the website www.ekinex.

com

• Each ekinex

device has a unique serial number on

the label. The serial number can be used by installers

or system integrators for documentation purposes and

has to be added in each communication addressed to

the EKINEX technical support in case of malfunctioning

of the device

• KNX

and ETS

are registered trademarks of KNX As-

sociation cvba, Brussels

documentation without notice.

Device release

Updating

6.0

05 / 2023

1.0