American Standard 1662SG.223 Handleiding voor installatie-instructies - Pagina 3
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} American Standard 1662SG.223. American Standard 1662SG.223 6 pagina's. Commercial shower system kits: 1.5 gpm & 2.5 gpm
Pagina afdrukken
5
INSTALL DIVERTER TRIM AND HANDLE
When finished tiling the wall, remove PLASTER GUARD.
Place ESCUTCHEON (1) onto ESCUTCHEON HOLDER (2).
Thread ESCUTCHEON HOLDER (2) onto DIVERTER VALVE (3).
Tighten until ESCUTCHEON (1) is snug against finished wall.
Install HANDLE SKIRT (4) onto VALVE STEM (5).
Push DECORATIVE RING (6) onto LEVER HANDLE (7).
Align LEVER HANDLE (7) and push onto
HANDLE SKIRT (4). Install HANDLE
SCREW (8) and tighten.
Push INDEX CAP (9) into LEVER
HANDLE (7).
6
INSTALL WALL SUPPLY
Supply to WALL SUPPLY is 1/2" NPT. See rough-in above for detailed information.
Apply sealant or sealing tape to threads of 1/2" NPT supply nipple.
7
INSTALL HOSE AND HAND SHOWER
TEST SHOWER SYSTEM
Install SEAL (1) into COUPLING NUT (2). Connect COUPLING NUT (2)
to WALL SUPPLY NIPPLE (3) and tighten.
INSTALL second SEAL (4) into SPRAY HOSE END (5) and connect
HAND SHOWER (6) to SPRAY HOSE END (5). Hand tighten.
Turn on water supplies and check all fuctions of of the SHOWER
SYSTEM KIT. Check for any leaks.
4
6
8
9
7
2
1
5
PLASTER GUARD
6
4
5
3
1
2
3
1/2" NPT
APPLY SEALANT
OR SEALING TAPE
M965668 Rev. 1.3 (1/17)