American Time Wi-Fi Battery Analog Clock Beknopte installatiehandleiding - Pagina 2
Blader online of download pdf Beknopte installatiehandleiding voor {categorie_naam} American Time Wi-Fi Battery Analog Clock. American Time Wi-Fi Battery Analog Clock 2 pagina's.
Pagina afdrukken
If clock was not preconfigured at American Time as recommended, please reference the
Installation & Operation Manual.
4
Verify clock hand placement
1.
Verify the clock hands are set at 12:00 by the factory (if not, stop and call 800-328-8996)
Note: It is normal for the minute hand to shift ±
2.
Remove the red gear locking pin
5
Set up the Wi-Fi clock
1.
Apply power to the clock by inserting the barrel plug
side of the Wi-Fi module where the power connection is located.
• Verify the LED (C):
– Flashes red when power is applied to the clock
– Turns solid green within 60 seconds
– Solid orange indicates a time server connection failure
– Solid red indicates a failed Wi-Fi connection
• Verify the clock hands begin to spin rapidly within three minutes after applying power.
• Verify the correct time on the clock within 10 minutes of applying power.
If any of these steps do not occur, reference the Wi-Fi Clock Installation & Operation Manual.
6
Hang your clocks
1.
Place the clock on the wall using the keyhole hanger on the back of the clock or the
optional security bracket (sold separately).
DC
C
LED
B
Battery
pack power
input
INST-WIFI-ANA Rev 3
⁄
minute.
1
2
(A)
from the movement.
(B)
A
Red gear
locking pin
Security
Bracket
of the battery pack into the left
Keyhole
Hanger