Air Creation Pixel 200 Instructie- en onderhoudshandboek - Pagina 9

Blader online of download pdf Instructie- en onderhoudshandboek voor {categorie_naam} Air Creation Pixel 200. Air Creation Pixel 200 16 pagina's.

Maintenance

Transport

Trikes should preferably be transported on light trailers (please consult us for further details).

Storage

The trike unit should be thoroughly checked and cleaned prior to storage. After cleaning, wipe all

components with a clean lightly oiled cloth, while avoiding joints and rubberized parts.

If the trike unit is to be stored for a long period (e.g. over the winter):

Place a well oiled cloth in the open end of the exhaust (leaving it obvious).

Cover the air inlet filters with several layers of protection as a precaution against condensation.

Drain the fuel tank.

Running in

Your trike's engine had been factory tested and checked, but requires running-in.

The engine should be run in on the ground as stated in the Polini instruction manual.

Maintenance

For the maintenance of the engine, follow the instructions of your Polini manual.

NEVER FLY USING AN PROPELLER UNBALANCED by shock or impact. Vibrations thus

generated will damage the reduction gear and the trike frame. If the propellor becomes unbalanced,

it should be returned to the factory for repair.

Every 10 hours of flight time:

Check all of the trike, engine and propeller nuts.

Check the rubber mounts of the engine.

Check the exhaust, the rubber mounts and the manifold springs. Check the air filter and the

rubber pipe from the carburetor to the engine.

Check fuel filter and fuel primer pump condition, cleanliness, attachments and ensure there are

no leaks in fuel hoses.

For the 250 model, check the cooling circuit, hoses, collars and radiator.

Check the propeller.

GDMANPixel-1G

Tél. : 33 (0) 4 75 93 66 66 - Fax : 33 (0) 4 75 35 04 03 - Internet : www.aircreation.fr

AIR CREATION Aérodrome de Lanas - 07200 AUBENAS - France

Version 0010

PAGE : 9